SIT9005ACL2G-33SD

Programmable Oscillators are a special kind of oscillators that can be programmed for their frequency, amplitude and phase to satisfy a range of frequencies, voltages and current usage requirements. The SIT9005ACL2G-33SD is a programmable oscillator designed for applications where a high performance, high reliability and low power consumption is required. It is ideal for use in telecommunications, industrial control and other specialized applications.

The SIT9005ACL2G-33SD is a medium power programmable oscillator that can be programmed for frequencies up to 20 GHz. It provides a frequency range of up to 1500 MHz, with a power consumption of under 1 Watt. It is capable of operating at temperatures up to +70°C and features a frequency stability of 0.1 ppm over temperature.

The SIT9005ACL2G-33SD has two main components – the oscillator and the programmable frequency divider. The oscillator is the key component which provides a reference frequency for the programmable frequency divider. The programmable frequency divider enables flexible programming of the output frequency. The programmable frequency divider is composed of three components – a control circuit, a frequency generator and a frequency divider.

The control circuit contains an EEPROM programmed by the user. The frequency generator generates clock signals at different frequency rates for the frequency divider to divide into clock cycles. The frequency divider consists of latches, counters and digital filters to produce output clock signals with a frequency range of up to 1500 MHz. The output frequency is programmable within the specified range and is controlled by the EEPROM address.

The SIT9005ACL2G-33SD is based on CMOS technology and has three main input pins – control (CLK), reset (RST) and output (OUT). The CLK pin is the main control line that is used to configure the frequency. The RST pin is used to reset the device and the OUT pin is used to output the clock signal. The SIT9005ACL2G-33SD features a low phase noise and is ideal for high speed communication systems. It also has a low jitter operation and is suitable for applications requiring high cycle-to-cycle stability.

The SIT9005ACL2G-33SD has a number of applications in telecommunications, industrial control and other specialized applications. It is especially suitable for Wi-Fi and cellular base stations where fast switching, high accuracy and reliability are required. In addition, it can be used in fast synchronous communication systems, such as ATM and Ethernet for synchronization and clock distribution. It is also appropriate for precision clock generation for servo motors and other control applications.