SIT9005ACL2H-28DP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators are commonly used circuits in many industrial applications. The SIT9005ACL2H-28DP series oscillator is one such example, offering features of programmable oscillators. This series includes models such as SIT9005A-AL2H-28DP, which is a dual-frequency programmable oscillator.

The SIT9005ACL2H-28DP series oscillator is designed to provide a general purpose oscillator. It is ideal for a wide range of applications, such as clock distribution, frequency metering, timing circuits and signal stabilization. It is also suitable as a cost-effective solution for applications where high frequency accuracy and interchangeability are required.

The SIT9005ACL2H-28DP series oscillator uses a single integrated circuit. This integrated circuit contains two differential oscillator cells, a controller and an output driver. The two oscillator cells provide a programmable two-frequency configuration, with a frequency range of 28 to 90 MHz. This series has an integrated p-channel switching MOSFET, an input pull-up resistor and a differential input reactance. The integrated oscillator cells use an R-Cut quartz crystal for low jitter performance and a 2mm x 8mm rectangular crystal for high frequency accuracy.

The SIT9005ACL2H-28DP series oscillator is also equipped with an integrated programmable timer register. This register allows the user to adjust the duty cycle to optimize the stability of the output clock. With the timer register, the duty cycle can be adjusted in increments of 0.1%. This helps the user to achieve a high degree of accuracy and helps to provide stable timing signals.

In addition, the SIT9005ACL2H-28DP series oscillator is designed with a power-down mode to reduce power consumption when the device is not in use. The power-down mode enables the oscillator to be activated in an energy efficient manner when needed. The power-down mode also prevents the oscillator from entering undesirable states during power cycling.

The SIT9005ACL2H-28DP series oscillator is also designed to function in a number of different programmable clock modes. These modes include continuous clock mode, reset mode, overlap mode, and phase-shift mode. In continuous clock mode, a clock output is continually generated, while in reset mode the oscillator is reset and a new clock output is generated. The overlap mode allows the oscillator to obtain a cross-clock signal, while the phase shift mode allows the output clock to be adjusted by a small amount.

Lastly, the SIT9005ACL2H-28DP series oscillator is equipped with a range of features for easy handling and customization. The oscillator can be programmed in a wide range of frequencies, and it can also be adjusted from a user-supplied voltage or directly from the main power supply. The SIT9005ACL2H-28DP series oscillator also presents a range of functions to facilitate user access, including a programmable O-state and power-down mode.

The SIT9005ACL2H-28DP series oscillator offers features of programmable oscillators ideal for a wide range of applications. It is designed with a single integrated circuit, a programmable timer register, a power-down mode, and a range of clock modes. Additionally, the oscillator can be programmed in a wide range of frequencies and adjusted with a user-supplied voltage or directly from the main power supply. All these features make the SIT9005ACL2H-28DP an invaluable component for many industrial applications.

The specific data is subject to PDF, and the above content is for reference