SIT9005ACR1G-18EA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators can be used in a variety of applications, ranging from general-purpose timers, power supplies and even medical equipment. The SIT9005ACR1G-18EA, in particular, falls under this category. Here, we discuss the application field and working principle of the SIT9005ACR1G-18EA.

The SIT9005ACR1G-18EA is a full-featured programmable oscillator which can be used in a variety of applications. It features a low-power power supply, a low-noise oscillator, and an high-frequency output. It can be used to generate low-frequency clocks, drive digital logic, or as an accurate frequency reference in many applications, such as PLL and clock synthesizers, digital filters, motor controllers, and high-speed clock frequency multipliers.

The operating frequency range of the SIT9005ACR1G-18EA is from 2MHz up to 25MHz, with an output level up to 200mV pp. This oscillator can be easily programmed by a serial interface, and the internal registers can be loaded with predefined values for easy adjustment of the frequency, duty cycle, and other parameters. In addition, this oscillator supports multiple operating modes, allowing it to perform a wider range of operations than a single-purpose oscillator. Depending on the input voltage and required output frequency, the oscillator can be programmed to switch between normal operation and low-power idle mode.

The SIT9005ACR1G-18EA features integrated voltage-controlled and temperature-compensated oscillators (VCTCXO). This type of oscillator typically offers high stability, as well as good linearity and accuracy across its operating temperature range, making it suitable for a variety of precise timing applications. This oscillator also features an on-chip temperature sensor, which allows it to maintain precise accuracy across a range of temperatures.

The working principle of this oscillator is based on an oscillation cycle which is divided into two main stages: the input and output stages. At the input stage, the oscillator produces a sinusoidal wave which is applied to an external circuit via the oscillator’s outputs. The output stage is where the sinusoidal wave is amplified and filtered through the programming components. By controlling the amplitude, frequency, and phase of the output waveform,it can drive different loads and produce various types of clock signals.

Overall, the SIT9005ACR1G-18EA is a highly-versatile and reliable programmable oscillator suitable for a wide range of applications. It features EEPROM-based programming, low power consumption and wide frequency range, making it an ideal choice for a range of digital applications.

The specific data is subject to PDF, and the above content is for reference