SIT9005ACR1H-XXSJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are devices that provide a means of electronically configuring the frequency, phase, gain and/or other characteristics of an oscillator, either on demand or in a static pre-set configuration. An example of such oscillators is the SIT9005ACR1H-XXSJ, a monolithic integrated oscillator designed for high performance applications requiring a low jitter and wide tuning range.

The SIT9005ACR1H-XXSJ is a low power, low jitter oscillator with an adjustable tuning range and a programmable output frequency. It is housed in a 10-pin MLCSP (Molded Leadless Chip Scale Package) package and has an operating temperature range of -40 to +85 degrees Celsius. This oscillator can be programmed to generate outputs at any frequency within the range of 0.25MHz to 100MHz. It offers excellent stability over temperature, voltage and environmental stress and is capable of a typical frequency modulation of + 10MHz.

The main application fields of this oscillator are in applications where a low jitter and wide tuning range are required, such as telecommunications, test and measuring equipment, and embedded control systems. In addition, this oscillator can be used as a clock source in large-scale microprocessor systems for desktop computers and servers.

The SIT9005ACR1H-XXSJ is a programmable oscillator which works on a number of different principles. The oscillator can be programmed to run at different frequencies by varying the setting of the control voltage and the setting of the capacitor. The oscillator works on the principle of negative resistance, this means that when a voltage is applied to the control voltage pin, the amplitude of the oscillating waveform increases. Similarly, when the capacitor is adjusted, the frequency of the oscillating waveform can be changed. As such, the frequency of the oscillator can be programmed over a wide range of values by adjusting the control voltage and capacitor setting.

The Amplitude of the oscillating waveform can be adjusted by changing the current input to the control voltage pin. The frequency of the oscillating waveform can also be adjusted by varying the control voltage and the capacitor setting. The amplitude of this oscillator can be set to any desired level by adjusting the current input. This feature makes the SIT9005ACR1H-XXSJ especially suitable for applications such as filters and clocks.

In addition, the SIT9005ACR1H-XXSJ is equipped with a selection of digital input pins which can be used to program its output frequency. These pins are connected to a serial-to-parallel shift register which is used to store a binary code corresponding to the desired output frequency of the oscillator. This provides an easy method of programming the oscillator without the need for additional components.

The SIT9005ACR1H-XXSJ is an ideal component for applications requiring a low jitter and wide tuning range. Its low power consumption and programmable output frequency makes it especially suitable for telecoms and embedded systems designs. With its wide tuning range and easy programming interface, this oscillator can provide a cost effective and reliable solution for many applications.

The specific data is subject to PDF, and the above content is for reference