SIT9005ACU1H-30EJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are time-converting circuits that receive an input voltage and produce a periodic output waveform. The output of the circuit can be a triangular waveform, a square waveform, or any other waveform, depending on the desired application. The SIT9005ACU1H-30EJ is an example of such a programmable oscillator.

Applications

The SIT9005ACU1H-30EJ is typically selected due to its use in applications requiring a high degree of accuracy and stability in the output waveform, such as equipment for telecommunications, timing control, as well as flash memory, semiconductor memory, etc. Additionally, this type of oscillator is also used in PLL applications, as they are capable of producing a stable output waveform over wide temperature variations.

Working Principle

The SIT9005ACU1H-30EJ works on the principle of negative feedback control. A voltage reference is used to depict the waveform that is to be generated. The output is then compared with this reference, and based on this comparison, the oscillator will adjust its output waveform accordingly. This type of oscillator consists of an amplifier and a low-pass filter. The amplifier amplifies any difference between the waveform coming from the reference and the waveform generated by the circuit. The low-pass filter than removes the high-frequency content of the output waveform, resulting in a stable, accurate output waveform.

The SIT9005ACU1H-30EJ utilizes two types of oscillator circuits in its design: the Pierce circuit and the Colpitts circuit. The Pierce circuit uses two capacitors in parallel with a single inductor, while the Colpitts circuit uses two inductors in parallel with a single capacitor. Each circuit has its own advantages and disadvantages, and depending on the application the oscillator is being used for, one type of circuit may be better suited than the other.

In addition to these two types of circuits, the oscillator also includes an amplifier and an analog control voltage input. The amplifier amplifies the difference between the reference voltage and the output waveform, while the control voltage input allows the user to fine-tune the output waveform. The control voltage can be used to adjust the frequency, the amplitude, or both.

Conclusion

The SIT9005ACU1H-30EJ is a programmable oscillator capable of producing a highly accurate and stable output waveform over wide temperature variations. It utilizes two types of oscillator circuits in its design, which are the Pierce circuit and the Colpitts circuit, as well as an amplifier and an analog control voltage input. This type of oscillator is suitable for applications requiring a high degree of accuracy and stability in the output waveform such as telecommunications equipment and timing control, as well as flash memory and semiconductor memory.

The specific data is subject to PDF, and the above content is for reference