SIT9120AC-1BF-25E74.175824E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic device used to establish an oscillating signal. They are formed by combining an oscillating circuit that is driven by an energy source with a waveform generator. The oscillating circuit is programmed to produce a specific frequency range, and the waveform generator is programmed to generate a specific waveform. There are a variety of types of oscillators, but this article is focused on the SIT9120AC-1BF-25E74.175824E oscillator.

The SIT9120AC-1BF-25E74.175824E oscillator is a quartz crystal oscillator that produces high frequency signals at a wide range of frequencies. It is designed for a wide range of applications such as automotive, industrial, medical, telecom, and consumer electronics equipment. It provides a high degree of accuracy, stability, and reliability for its applications.

The SIT9120AC-1BF-25E74.175824E is a low phase noise, low jitter, high speed oscillator. It operates in a frequency range of 24.0 MHz to 40.0 MHz, and features a typical frequency deviation of ±15ppm. The device is also equipped with two alarm outputs and a selectable power output for use in battery operated systems.

The SIT9120AC-1BF-25E74.175824E oscillator employs a basic physics principle known as crystal oscillation. This phenomenon occurs when a quartz crystal is vibrated by an electrical signal of a certain frequency. The vibrations are sustained by the crystal and dissipate energy in the form of sound waves. The frequency of these waves can be precisely controlled and is known as the resonant frequency. The frequency of the resonant wave can be adjusted by changing the voltage that is applied to the crystal.

The oscillator works in two stages. The first stage is the feedback amplifier, which amplifies the waveform. The second stage is the crystal driver, which applies a voltage to the crystal to control the resonant frequency. The oscillator output is then passed through a low-pass filter, which removes any unwanted higher frequency components from the waveform.

The SIT9120AC-1BF-25E74.175824E oscillator is an ideal choice for applications that require a high degree of accuracy, stability, and reliability. The device is suitable for applications such as radio systems, medical diagnostic equipment, telecommunications systems, industrial machines, and process control systems. It can also be used in aerospace, automotive, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference