SIT9120AC-1BF-25S50.000000G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits designed to generate repeating electronic signals. They are typically used to generate a periodic electronic signal, known as a waveform. These waveforms can be used to create electrical signals or to drive specific types of electronic circuits. Oscillators are widely used in a variety of electronic applications, including telecommunications, audio, medical, scientific research, and automotive. The SIT9120AC-1BF-25S50.000000G is one such oscillator. It is a surface-mount device and is capable of generating simultaneously waveforms with a frequency range of 0.1~50MHz with output levels of 0.6Vpp~3Vpp (into 50 ohms). It features 100µs startup time, 12 dBm/Volt output power into 50 ohms, and 3x7mm SMD package. It is suitable for a variety of applications such as communications, mobile phones, DAB, dual-tone multi-frequency (DTMF) transmissions, OBS systems, WI-FI networks, medical diagnostic systems, etc.

The SIT9120AC-1BF-25S50.000000G is also used in a wide variety of applications and in many different industries. It can be used in radio transmitters, wireless networking, and astronomy. In radio transmitters, the signal generated by SIT9120AC-1BF-25S50.000000G can be used to modulate the frequency of the transmitted wave to create a wide range of different carrier frequencies. In wireless networking, it can be used to generate a wide range of frequencies to send data from one device to another. In astronomy, the signal generated by the oscillator can be used to measure the movements of stars, providing a detailed picture of the night sky.

The working principle of SIT9120AC-1BF-25S50.000000G is based on generating a periodic signal by using a feedback loop. The oscillator contains an amplifier and an oscillation frequency setting circuit. The amplifier amplifies the oscillation frequency to the required level. The frequency setting circuit is responsible for setting the oscillation frequency. This can be done through a combination of capacitors, resistors, and transistors. The frequency is set by changing the set of components used in the frequency setting circuit. When the oscillator is running, the output of the amplifier is then fed back into the input of the amplifier. This creates a feedback loop which continues to oscillate at the set frequency.

The SIT9120AC-1BF-25S50.000000G is a versatile oscillator capable of providing many different waveforms with varying frequency and output levels. It is suitable for a large number of applications in a variety of industries. In radio transmitters, wireless networking, astronomy, and other applications, the SIT9120AC-1BF-25S50.000000G is an efficient and reliable device capable of providing an accurate and reliable signal.

The specific data is subject to PDF, and the above content is for reference