SIT9120AC-1C3-33E212.500000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are important among radio frequency applications since they are used as crucial components for various fields such as filters, amplifiers, and mixers. Of these oscillators, SIT9120AC-1C3-33E212.500000Y oscillators belong to the class of voltage controlled oscillators (VCOs). It has many applications that make it one of the important options available in today’s market.

The SIT9120AC-1C3-33E212.500000Y oscillator generates a fixed frequency output signal with varying frequency when temperature is changed. The frequency range is 212.5 MHz to 512 MHz. This oscillator is the highest performing voltage controlled oscillator in its frequency range, providing excellent noise, phase noise, harmonics, and power supply rejection performance.

SIT9120AC-1C3-33E212.500000Y operates on the principle of frequency tuning via its internal voltage-controlled oscillator. The oscillator is composed of two stages—an LC tank and a voltage-controlled amplifier. When a voltage is applied to the gate of the voltage-controlled amplifier, the resonance frequency of the LC tank changes accordingly. If the voltage applied is a constant, the oscillator produces a periodicwaveform. This waveform is referred to as the output frequency.

One of the major applications of this oscillator is its use in frequency synthesizers. Frequency synthesizers are used to generate precise frequency in the microwave radio frequency range. The frequency synthesizers combine VCOs, harmonic mixers, and filters to generate an output across the desired range. This oscillator is used to provide the tuning control for the frequency synthesizers.

The SIT9120AC-1C3-33E212.500000Y oscillator is also used in phase-locked loops. In a phase-locked loop, the oscillator is used as the main component of a servo system that is used to control and maintain the output frequency and phase of the output signal. The PLL uses the frequency generated by the oscillator to control the output frequency and phase so that it is accurately matched to the demanded frequency.

This oscillator is also used in transmitters for radio communication.The oscillator provides the output signal that is used to modulate information, such as audio or video, onto the radio frequency carrier.The SIT9120AC-1C3-33E212.500000Y oscillator is used in both FM and AM transmitters.

The SIT9120AC-1C3-33E212.500000Y oscillator is also used in receivers forcommands in remote controls. This oscillator is used to finely tune the output signal to the exact frequency band of the receiver to receive the commands.

In addition to these applications, the SIT9120AC-1C3-33E212.500000Y oscillatoris also used in phased-array antennas and microwave radios. Phased-array antennas use this oscillator to adjust the antenna beam direction or scan angle, while microwave radios use the oscillator to transmit signals between two points.

The SIT9120AC-1C3-33E212.500000Y is an important oscillator in today’s market due to its versatility and multiple applications. Its high performance parameters and dependable performance makes it a valuable component for radio frequency applications.

The specific data is subject to PDF, and the above content is for reference