SIT9120AC-2C3-33E74.175824Y

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	35mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	55mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	SiT9120
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	74.175824MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical signals that exhibit a repetitive, periodic, and oscillating behavior. The type of oscillator designated by SIT9120AC-2C3-33E74.175824Y is a voltage-controlled oscillator (VCO) that works using feedback and electrical components to produce a specific frequency. This type of oscillator is used in both commercial and military applications.The SIT9120AC-2C3-33E74.175824Y is a wide-band voltage-controlled oscillator (VCO) that operates over a wide range of frequencies. This high-performance, low-noise oscillator provides reliable operation over an extended temperature range. It can be used for signal generation applications including automated test equipment, radar systems, and mobile communication systems.The working principle of the SIT9120AC-2C3-33E74.175824Y oscillator is based on a negative resistance system. It consists of a drive circuit that injects current into a non-linear negative resistance element. This drives the element into an oscillatory state and the frequency of oscillation is determined by the circuit components used and the DC bias. A feedback network, typically a capacitor and inductor, is used to maintain the oscillation.In the SIT9120AC-2C3-33E74.175824Y, the voltage-controlled oscillator uses a controlled voltage for control to ensure precise and repeatable operation. A voltage from an external source will control the frequency of the oscillator. This allows the user to adjust the frequency of the oscillator to the desired frequency or duty cycle. It also allows the user to precisely program the oscillator to generate waveforms of known frequencies.The SIT9120AC-2C3-33E74.175824Y has four pins that provide the control voltage, ground, and output. The Vcc pin provides the positive supply voltage, while the Control voltage pin provides the user adjustable voltage for tuning the frequency. The Ground pin provides a reference point for the control voltage, and the Output pin provides the oscillator’s output signal.The SIT9120AC-2C3-33E74.175824Y oscillator is designed to operate over a wide operating temperature range (-65°C to +85°C). This allows it to be used in applications involving extreme environmental conditions. The oscillator is also designed to have low power consumption and low phase noise, allowing it to be used in low power, low noise applications.In conclusion, the SIT9120AC-2C3-33E74.175824Y voltage-controlled oscillator is a high-performance, low-noise oscillator that is suitable for a wide range of applications. It uses a controlled voltage for control and permits precise control and repeatable operation of the oscillator across a wide range of frequencies. Its four pins provide the control voltage, ground, and output for operation of the oscillator. It also operates over a wide operating temperature range and has low power consumption and low phase noise, allowing it to be used in low power, low noise applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description