SIT9120AI-2B2-25E148.500000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate periodic signals, usually without an external input. They are classified according to the nature of the output waveform, the frequency control method, the level of output power, and the like. SIT9120AI-2B2-25E148.500000Y is one of these oscillators. In this article, we will discuss the application field and working principle of SIT9120AI-2B2-25E148.500000Y oscillator.

The SIT9120AI-2B2-25E148.500000Y oscillator is a fully integrated, high-performance oscillator that generates a standard quartz crystal oscillation circuit for a variety of applications. The frequency can be selected from a wide range of 100KHz to 148.500000MHz and the output type is ECL/CMOS, making it suitable for a variety of applications.

Application fields of the SIT9120AI-2B2-25E148.500000Y oscillator include but are not limited to, radio communications, electronic countermeasures, military radar, test and measurement, satellite communications, monitoring,etc. It can also be used in automotive applications, where it is used for speed monitoring, sensing, and control purposes.

The working principle of the SIT9120AI-2B2-25E148.500000Y oscillator is based on the piezoelectric effect. It utilizes a quartz crystal as the resonator, and an oscillator circuit to produce a signal of constant frequency. The frequency of the output signal is determined by the frequency of the crystal, and can be adjusted by adding or subtracting capacitors to the oscillator circuit. The oscillator circuit consists of an amplifier, a pair of resistors, and a capacitor, all of which are connected to the crystal resonator.

The function of the amplifier is to provide an adjustable amount of gain, which is used to adjust the amplitude of the signal. The capacitors and resistors provide the necessary feedback, and direct the output signal to the desired frequency. The amplifier also tends to reduce the amplitude of the signal, so that it is not too high and does not cause distortion.

The SIT9120AI-2B2-25E148.500000Y oscillator is a reliable device that can be used in a variety of applications. It is relatively inexpensive, and can be used for both low- and high-frequency applications. Its ability to generate a signal of constant frequency makes it suitable for applications such as frequency and time synchronization, navigation, and sound reproduction. It is also widely used in radio communication, laboratory research, and other fields, due to its superior performance and reliability.

The specific data is subject to PDF, and the above content is for reference