SIT9120AI-2BF-25S50.000000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are components that generate a steady, repetitive electric signal. Their output frequencies can range from a handful of hertz up to hundreds of gigahertz. Oscillators are found in a wide range of applications from clock and timing circuits to radio communications and signal generation. Today, the development of modern technologies such as software defined radios (SDRs) is pushing the potential of oscillators further.

The SIT9120AI-2BF-25S50.000000E is one such oscillator. This component is a voltage-controlled oscillator (VCO) which can be used to create high frequencies with extremely low phase noise. It has a frequency range of 47.2 to 50.2GHz, making it ideal for applications that require wide frequency tuning range over a relatively small band. The oscillator also has a low power dissipation, low jitter and low phase noise of -165dBc/Hz at 10KHz offset.

Because of its high frequency and wide tuning range, the SIT9120AI-2BF-25S50.000000E is ideal for use in communications and signal generation applications. In particular, the oscillator can be used in mobile radio, base station radios, satellite communications, and radar operations. The low phase noise of the oscillator helps to minimize interference in such operations.

The SIT9120AI-2BF-25S50.000000E has a variety of different modes that can be used to adjust the characteristics of its output signal. For example, the oscillator can be set to analog mode to effectively tune the frequency and amplitude of its output signal in real time. In Digital mode, the SIT9120AI-2BF-25S50.000000E can be controlled through a digital interface, allowing its users to programmatically change its output characteristics.

In terms of its working principle, the SIT9120AI-2BF-25S50.000000E utilizes the principle of phase-locked loop (PLL) to generate its output signal. A PLL consists of three basic components - a voltage-controlled oscillator (VCO), a reference oscillator, and a phase detector. The VCO is the main component of the PLL and is the one responsible for generating the output signal. The other two components, the reference oscillator and phase detector, are used to set and maintain the output frequency. The phase detector compares the phase of the output of the VCO and reference oscillator and generates a correction signal, which is used to adjust the VCO output frequency until it is in phase with the reference oscillator. The oscillator remains in a locked state as long as the incoming reference signal is in phase with the VCO output. This allows the oscillator to stay in a predetermined frequency range for a long period of time.

The SIT9120AI-2BF-25S50.000000E is an ideal choice for applications that require a wide frequency range and low phase noise. With its versatile features and high performance, it is an excellent choice for high-frequency communications and signal generation applications. Its phase-locked loop architecture makes it extremely reliable and accurate at detecting and maintaining a specified frequency range.

The specific data is subject to PDF, and the above content is for reference