SIT9120AI-2D2-25E166.666000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used to generate periodic, repetitive signals in electrical circuits. One type of oscillator is the SIT9120AI-2D2-25E166.666000T, a digitally controlled, programmable, output frequency oscillator. It is designed to provide users with a wide range of frequency stability and accuracy while providing low power consumption and high performance level.

This type of oscillator is typically used in a variety of applications such as clock synchronization, timing, reference signal generation, signal synthesis, and frequency hopping. It is also used in a variety of communications, transportation, telecommunications, computer, consumer electronics, industrial control products, automotive electronics, aerospace, medical electronics, printing, automation, and other fields.

The working principle of the SIT9120AI-2D2-25E166.666000T oscillator is based on a feedback loop that is used to maintain a specific frequency. It consists of a voltage controlled oscillator (VCO) which is the main component that generates and controls the frequency of the output signal. The VCO is connected to a programmable divider, which divides the output signal down to a lower frequency. This lower frequency is then fed into a phase-locked loop (PLL), which adjusts the frequency of the output signal to maintain the desired frequency.

The PLL is connected to a frequency-to-voltage converter, which is used to measure the frequency of the output signal so that it can be compared to the desired frequency. If the measured frequency is not the same as the desired frequency, the PLL will adjust the output signal to correct the mismatch.

In addition to the VCO, the SIT9120AI-2D2-25E166.666000T oscillator also includes other components such as a temperature-compensation circuit, a signal interface, an adjustable pull-up resistor, a temperature sensor, and a reference clock. The temperature-compensation circuit is used to reduce the frequency fluctuation due to temperature variation, while the signal interface is used to provide input and output signals and to control the frequency of the oscillator.

The adjustable pull-up resistor is used to adjust the output frequency, while the temperature sensor is used to measure the temperature in the device and to adjust the output frequency accordingly. The reference clock is used to monitor the frequency of the output signal and to synchronize the output signal with another signal.

The SIT9120AI-2D2-25E166.666000T oscillator is a powerful and versatile device that can be used in a wide variety of applications. With its wide range of frequency stability, accuracy, low power consumption, and high performance level, it is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference