SIT9120AI-2DF-33E100.000000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic component that produces a periodic signal, either in the form of an electrical voltage or a current flow. The signal produced typically varies in frequency and amplitude, and is often generated using a periodic waveform or square waveform. Oscillators are used in a variety of applications, such as electrical power and audio equipment, as well as in electronic control systems.The most common type of oscillator is the SIT9120AI-2DF-33E100.000000X, which is used for high frequency signal applications. This oscillator is a highly reliable, hermetically sealed unit with a wide operating temperature range of -10-+55°C and a high-precision voltage controlled crystal oscillator (VCXO). It features a high-frequency signal output range of 2.0kHz to 100MHz, low phase noise of -125dBc/Hz, low ripple (-30dB) of 1.25Vpp, and a low-power consumption of 35mA max.The SIT9120AI-2DF-33E100.000000X oscillator uses a voltage controlled crystal oscillator (VCXO) to generate a precision frequency signal. The VCXO is essentially a quartz crystal resonator with a built-in amplifier and control circuitry. The resonator is made of a quartz crystal that is cut at a specific angle so that, when a voltage is applied, the quartz crystal will vibrate at its natural frequency. The amplifier and control circuitry will then amplify the signal and adjust the frequency of the oscillator to the desired frequency. The amplitude and frequency of the signal can be adjusted through the use of external components.The SIT9120AI-2DF-33E100.000000X oscillator is used in a wide array of applications such as communications, navigation, radar, industrial control, and scientific instruments. In communications, it is used for frequency division multiplexing (FDM) systems where multiple digital signals are sent simultaneously on different frequencies. In radar systems, it is used for pulse compression in radar pulses to improve the range resolution of the radar system. In industrial control, it is used as an internal clock to trigger a sequence of process steps. In scientific instruments, it is used to precisely control the frequency of instruments such as spectrometers and analyzers.The SIT9120AI-2DF-33E100.000000X oscillator is an ideal choice for high precision frequency applications that require a high frequency signal output, low phase noise, low ripple, and low power consumption. Its wide operating temperature range, as well as its reliability and precision make it a great solution for demanding applications.

The specific data is subject to PDF, and the above content is for reference