SN75C3232EDB

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	300mV
Data Rate:	1Mbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	16-SSOP (0.209", 5.30mm Width)
Supplier Device Package:	16-SSOP
Base Part Number:	SN75C3232E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>Introduction</h2><p>The SN75C3232EDB is a high-speed differential line driver and receiver designed for use in E1/T1, RS-449/V.35, and IEEE 1284 applications. This device allows two lines of subject to be controlled by one microprocessor and has a maximum data rate of up to 10 Mbps. Additionally, it allows for bidirectional communication, providing the capability for both the transmitting and receiving ends to be connected together. The device comes in two packages, the SN75C3232EDB TTL/DTL line driver and the SN75C3232EDB standard logic line driver, increasing the versatility of its usage.</p><h2>Application Field</h2><p>The SN75C3232EDB provides a broad range of applications due to its wide range of features. Its primary application field can be used in E1/T1, RS-449/V.35, and IEEE 1284 applications. Additionally, it can be integrated with high-speed remote data access services, such as ISDN and ADSL to provide the required data transfer between the local microprocessor and the remote access points. This device is also suitable for use in point-to-point networks, such as in high-speed data acquisition systems and multimedia systems, as well as for building local and/or wide area networks.</p> <h2> Working Principle of SN75C3232EDB</h2><p>SN75C3232EDB consists of two different functional sub-blocks, the receive block and the transmit block. The receive block consists of two differential line receivers which are responsible for receiving data signals from the local microprocessor. The transmit block consists of two differential line drivers, which are used to transmit data signals to the remote access points.</p> <p>The SN75C3232EDB also includes an optional Enable/Select circuit, which can be used to control the devices transmit and receive functions. This circuit is used to control the direction of data flow, either allowing data to be received from the local microprocessor or received from the remote access point. Additionally, the Enable/Select circuit can be used to control the transmit and receive function either independently or in sync.</p><p>The SN75C3232EDB is powered from a single +5V supply and can operate over a broad range of temperatures from -40 to +85C. The device has a power consumption of only 1.2 mW and is designed to meet the low-power needs of most remote access applications.</p><h2>Conclusion</h2><p>The SN75C3232EDB is a versatile, high-speed differential line driver and receiver designed for use in a wide array of applications. Its two packages, the SN75C3232EDB TTL/DTL line driver and the SN75C3232EDB standard logic line driver, increase the versatility of its usage even further. Its use in E1/T1, RS-449/V.35 and IEEE 1284 applications make it the perfect choice for high-speed data transfer. Additionally, its ability to control the direction of data flow, with the aid of the Enable/Select circuit, provides this device with the ability to connect two lines of data together and provides bidirectional communication between the local microprocessor and the remote access points.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description