SN75LBC176DRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75LBC176DRG4 is part of the Texas Instruments (TI) line of small-package, low-power, Differential Bus Transceivers. These pins are commonly used in bus-oriented applications to interface different system components with differential transmissions, in which signals are transmitted through dual wires, with the advantage of providing more noise immunity than single-ended signals. The drivers and receivers in this device feature full-power bandwidth, which allows the devices to operate at a high data rate across wide supply voltages. The TI SN75LBC176DRG4 can be used in a number of different applications, such as Network-on-Chip (NoC) communications, data acquisition and communication links, high speed transceiver interface designs, and digital high-speed instrumentation. In addition, it is also suitable for clock and data synchronization between different systems and various buses.

In terms of its architecture, the SN75LBC176DRG4 consists of two high speed, low power differential bidirectional transceivers with independent direction control for the inputs and outputs. The transceivers are fabricated with N- and P-channel enhancement mode MOSFETs, with 175 ohm resistive termination for the outputs, and Schottky TTL input protection diodes for the inputs. This device has an output slew limitation system with a peak current of 10 mA, which allows it to transmit data at high speed and low power.

In addition to its drivers and receivers, the SN75LBC176DRG4 also features a power-off disable and enable control, as well as an external fault reporting feature. This means that the device can be disabled externally, in order to reduce power consumption when the device is not in use. The external fault reporting feature allows the device to indicate if there are any external faults, in order to enable fault tolerance in a bus-oriented system.

The SN75LBC176DRG4 works on the principle of LVDS, or Low Voltage Differential Signaling. This protocol works by encasing the signals of the two wires in a differential voltage. This is a much faster and more reliable method than the unbalanced, single ended signaling protocols employed by the TIA/EIA-422 and EIA-485 standards. LVDS allows for higher transmission rates and clearer signals, as well as providing added protection from external noise.

As a result, the SN75LBC176DRG4 can be used in applications requiring high speed and low power consumption with little interference, such as telecom and datacom systems, as well as embedded systems and low-voltage, high-speed parallel communications system designs. Overall, the SN75LBC176DRG4 is a robust, reliable and low-power differential bidirectional transceiver, ideal for any number of applications.

The specific data is subject to PDF, and the above content is for reference