Allicdata Part #: | SNR-10-223-D-ND |
Manufacturer Part#: |
SNR-10-223-D |
Price: | $ 16.86 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 50VDC 10A DIN RAIL |
More Detail: | N/A |
DataSheet: | SNR-10-223-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 15.32160 |
Series: | SNR |
Part Status: | Active |
Filter Type: | DC |
Configuration: | Single Stage |
Voltage - Rated DC: | 50V |
Voltage - Rated AC: | -- |
Current: | 10A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, TUV |
Operating Temperature: | -40°C ~ 71°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules have become increasingly commonplace with the advancement of communication and signal technology. As different frequencies, voltages, or currents are generated in electrical equipment, harmonic distortion may develop if left unchecked. SNR-10-223-D Power Line Filters are designed to reduce these harmonics and provide better signal quality. This article will discuss the application and working principle of the SNR-10-223-D Power Line Filter.
The SNR-10-223-D Power Line Filter is a three-phase, zero-phase ultra-wide band filter module. It is designed to eliminate multi-carrier, multiple bandwidth harmonics and distortion that occur in power transmission systems, and to reduce common mode noise. The module can be used in a variety of applications, including substations, protective relays, AC drive systems, power transformers, UPSs, power ships, and industrial frequency conversion and power systems. In addition, the SNR-10-223-D Power Line Filter is suitable for use in high- and low-voltage systems, as well as for frequencies ranging from 50 Hz to 3kHz.
The operating principle of the SNR-10-223-D Power Line Filter relies on the use of inductive-capacitive-resistive (LCR) networks to create an effective low-pass filter. These networks are designed to filter out harmonics and other high-frequency components in the electrical system, leaving only the desired frequency components. This reduces the harmonic distortion and improves the signal quality. The networks used in the SNR-10-223-D Filter are also designed to be robust and durable, with the ability to withstand high temperature and vibration levels.
In order to ensure the proper operation of the SNR-10-223-D Power Line Filter, it must be correctly installed and connected. First, the filter should be connected to the circuit in the same plane as the power supply. This ensures that the filter does not distort the power supply. Next, the filter must be connected to the circuit via the appropriate shielded or non-shielded wire. The optimal connection method should be determined based on the application. Finally, the filter should be connected to a ground point to provide additional filtering and grounding protection.
The SNR-10-223-D Power Line Filter is an efficient and reliable way to reduce harmonics and distortion in power systems. It is designed to be robust and durable, and is suitable for use in a wide variety of applications. With proper installation and connection, the filter can provide a high level of filtering performance and improved signal quality.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT