SNR-10-223-DT

Series:	SNR
Part Status:	Active
Filter Type:	DC
Configuration:	Single Stage
Voltage - Rated DC:	50V
Voltage - Rated AC:	--
Current:	10A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, TUV
Operating Temperature:	-40°C ~ 71°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction Power Line Filter Modules are mainly used to reduce electrical interference to the power supply caused by high frequency electronic components. The SNR-10-223-DT Power Line Filter Module is designed to achieve high fidelity noise suppression with minimal insertion loss at the wanted signal frequency. This module is suitable for a wide range of applications especially in industrial control and signal conditioning circuits.SNR-10-223-DT Electrical Specifications The SNR-10-223-DT Power Line Filter Module has an input voltage of 10 - 300V DC and an output voltage of 10 - 300V AC. It has a nominal cutoff frequency of 400kHz and a maximum insertion loss of 0.3dB. The amount of current that the module can handle is 10A and its maximum capacitance is 0.4uF. The package size of the module is 11mmx22mmx21mm. Applications The SNR-10-223-DT Power Line Filter Module can be used in many different applications, such as: • Industrial Control: The SNR-10-223-DT can be used to reduce electrical interference that could affect the operation of industrial controllers. This will ensure that the controllers and other related equipment are operating correctly. • Signal Conditioning: The SNR-10-223-DT can be used to reduce noise generated by electronic components in signal conditioning circuits. This will ensure that the signal is transmitted clearly and accurately. • Automobile Electronics: The SNR-10-223-DT can be used to reduce unwanted electrical interference in automotive electronics such as car stereos and car alarms. • Medical Equipment: The SNR-10-223-DT can be used to reduce electrical interference in medical equipment, which can help to ensure the accuracy of measurements and readings in medical devices.Working Principle The SNR-10-223-DT Power Line Filter Module works by reducing interference caused by electromagnetic radiation. The module consists of an inductor, a capacitor, and a resistor, which are connected in such a way that the amount of interference they can reduce is maximized.The inductor serves to block frequencies above the cutoff frequency while the capacitor blocks frequencies below it. The resistor reduces the amount of current that can flow, reducing the amount of noise that can pass through the module. By combining all these components together, the module can effectively reduce the amount of interference caused by electromagnetic radiation. Conclusion The SNR-10-223-DT Power Line Filter Module is a highly effective device for reducing electrical interference caused by electromagnetic radiation. It is suitable for many different applications such as industrial control, signal conditioning circuits, automobile electronics, and medical equipment. The module works by blocking frequencies above and below the cutoff frequency and reducing the amount of current that can flow. By doing this, the module can effectively reduce the amount of interference caused by electromagnetic radiation.

The specific data is subject to PDF, and the above content is for reference