Allicdata Part #: | 905-1065-ND |
Manufacturer Part#: |
SP-L-0750-203-1%-RH |
Price: | $ 23.91 |
Product Category: | Sensors, Transducers |
Manufacturer: | |
Short Description: | SENSOR SOFTPOT 20K OHM 750MM |
More Detail: | Resistive Sensor Linear Position Flexible Membrane... |
DataSheet: | SP-L-0750-203-1%-RH Datasheet/PDF |
Quantity: | 1000 |
25 +: | $ 21.73600 |
Series: | SoftPot |
Part Status: | Active |
For Measuring: | Linear Position |
Technology: | Resistive |
Rotation Angle - Electrical, Mechanical: | -- |
Linear Range: | 0 ~ 750.00mm (0 ~ 29.53") |
Output: | Resistive |
Output Signal: | -- |
Actuator Type: | Flexible Membrane - Linear |
Linearity: | ±1% |
Resistance: | 20 kOhms |
Resistance Tolerance: | ±20% |
Voltage - Supply: | -- |
Mounting Type: | Custom |
Termination Style: | Connector |
Operating Temperature: | -40°C ~ 50°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.Position sensors, such as angle and linear position measuring, are used to sense and measure the relative motion between two points. One of the most commonly used is the SP-L-0750-203-1%-RH sensor, which is designed to measure the angular displacement of rotating components in a variety of applications. This article will discuss the application field and working principle of the SP-L-0750-203-1%-RH position sensor.
The SP-L-0750-203-1%-RH position sensor is a small, low cost angular position sensor ideal for applications ranging from automotive electronics to consumer appliances. The sensor detects angular shifts by utilizing a permanent magnet with an attached stator and a rotating component combined with a Hall-effect device. The stator\'s inner circle is magnetized with a continuous alternating north and south pole pattern, while the rotor\'s blades are fitted with a rotary encoder that is capable of reading the stator\'s signal. As the rotor rotates, its blades will pass in front of the stator\'s magnetized ring, generating a signal that is detected by the Hall-effect device. This signal is then sent to an output device, such as the vehicle\'s computer, allowing it to accurately measure the angular displacement of the rotating component.
The SP-L-0750-203-1%-RH position sensor is used in a range of applications, including automotive electronics, consumer appliances, medical equipment, robotics, and other industrial applications. In automotive applications, it can be used to measure the displacement of the throttle valve or the crankshaft position. In consumer appliances, it is commonly used to measure the angle of a door handle or motor fan blade and is also commonly used to adjust the speed and timing of machine functions. In medical equipment, it is used to measure and transmit the angle of a patient\'s neck or back and is used to measure the rotational speed of a motor in industrial applications.
The SP-L-0750-203-1%-RH position sensor is also used in robotics applications, where it is used to measure and control the angular displacement of robot joints, providing the robot with accurate motion tracking. The sensor is also used in high-volume production lines, where it is used to measure the rotational speed of motors and other components for quality control. Additionally, it is also used in industrial systems to measure the displacement of linear slides or to control the angle of a swing arm.
The SP-L-0750-203-1%-RH position sensor operates on the principle of magnetically induced eddy currents. As the rotor passes in front of the stator\'s magnetic field, it generates eddy currents in the rotor\'s axis, which then induce a voltage in the rotor\'s blades. This voltage is then picked up by the sensor\'s Hall-effect device and sent to the output device, allowing the angular displacement of the rotating component to be accurately measured. The sensor is extremely accurate, with a maximum angular position measurement error of less than one percent.
In conclusion, the SP-L-0750-203-1%-RH position sensor is a cost-effective solution for measuring angular displacement in a variety of applications. It is capable of accurately measuring the angular displacement of rotating components in automotive electronics, consumer appliances, medical equipment, robotics, and other industrial applications. The sensor operates on the principle of magnetically induced eddy currents, allowing it to measure the angular displacement of the rotating component with an accuracy of less than one percent.
The specific data is subject to PDF, and the above content is for reference
POS TRANS-XDCR EWA-114 WIPERSensor
POS TRANS-XDCR MEL 75 MMSensor
POS TRANS-XDCR LFT 6 IN 5K/1.0%Sensor
POSITION TRANSDUCERSensor
POTENTIOMETERHall Effect Sensor Rotary P...
ROTARY NON-CONTACT ANALOG SENSORHall Eff...