SP1008-153G

DC Resistance (DCR):	2.1 Ohm Max
Height - Seated (Max):	0.095" (2.41mm)
Size / Dimension:	0.115" L x 0.105" W (2.92mm x 2.66mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SP1008
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	232mA
Tolerance:	±2%
Inductance:	15µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Fixed Inductors
Fixed inductors are passive electronic components that are widely used in circuit design for generating magnetic fields and for storing energy. They come in various shapes and sizes, depending on their application. An example of a popular fixed inductor is the SP1008-153G. This inductor is normally seen in power electronics, switch-mode power supplies, and multiple circuit board applications. The SP1008-153G is a surface mount inductor with a maximum inductance of 15µH and a rated current of 13 A. It has a small outline package that is only 12.4mm x 8.9mm x 7.6mm in size, making it suitable for printed circuit board applications that require minimal space. Additionally, this part has an operating temperature range of -40°C to +105°C and a peak operating frequency of up to 5 MHz. The purpose of an inductor is to resist the flow of alternating current (AC) and to store energy in the form of a magnetic field. The inductor does this by using several coils of wire that have a start and a finish that are connected together. Each coil has a certain amount of resistance, meaning that, when a current is applied, a magnetic field is created in the form of circular loops. The magnitude of this magnetic field is proportional to the amount of current applied.The SP1008-153G is a non-polarized, ferrite core inductor. It uses two wires, one at its starting point and one at its end, which is then soldered to the circuit board. This allows the inductor to provide consistent performance, even when the amount of current going through it changes. The SP1008-153G also has low DC resistance of only 0.02 Ω, so it can support large currents without overheating. The low DC resistance also helps to reduce the power consumption in the circuit, leading to an overall lower power consumption for the entire system.Although the SP1008-153G can resist current up to 13 A, it has an aggressive temperature rise when the current approaches this limit. This means that it must be used in conjunction with a thermal management system to keep the system from overheating. The SP1008-153G also offers a variety of operating frequencies, giving it a wide range of applications. It can be used in power supply circuits, voltage-mode control, and audio circuits. In power supply circuits, the inductor can be used as an input filter, rectification filter, output filter, and inductor-resistor filter. In voltage-mode control circuits, the SP1008-153G can be used as a transceiver and in on-off control lines. And finally, it can be used in audio circuits as an impedance matching device and a tone-control Baxendall circuit. In summary, the SP1008-153G fixed inductor is a versatile and small-sized passive component that can be used in many different applications. With its low DC resistance, high peak operating frequency, and a wide range of operating temperatures, this component is an ideal choice for any number of circuit designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description