SP1210-683G

DC Resistance (DCR):	6.1 Ohm Max
Height - Seated (Max):	0.101" (2.57mm)
Size / Dimension:	0.138" L x 0.105" W (3.51mm x 2.66mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SP1210
Shielding:	Shielded
Current - Saturation:	157mA
Current Rating:	185mA
Tolerance:	±2%
Inductance:	68µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors have a wide variety of uses in electronic circuits and systems. The SP1210-683G is an inductor specifically designed for high-frequency signal routing applications. It is used in power/control circuits, as a filter or as a resonance component. It is also suitable for use in circuits involving communication systems and other high-speed digital signal applications.The SP1210-683G is a high-quality, low-profile, part-wrap inductor with a ferrite core. Its construction consists of a magnetic core material covered with a winding of enameled copper or aluminum wire. This material and construction method ensures the SP1210-683G has low internal resistance and high inductance. It has excellent thermal resistance, making it suitable for use in high-temperature applications. The SP1210-683G is a fixed inductor, which means its output is not adjustable and is dependent on the inductance of the core material that is used. The inductance value of the SP1210-683G is between 6.8 and 10uh (micro-henries), and it can handle high current levels up to 0.7A. The working principle of the SP1210-683G is based on the concept of inductance. Inductance is the property of an inductor which causes an electric current to flow through it when a voltage is applied to it. This means that the current flowing through the SP1210-683G will be proportional to the applied voltage. When the current flowing through the inductor is increased, the inductance also increases. This principle is how the fixed inductor works: when an AC voltage is applied, the current will be diverted to the inductor, resulting in an increased inductance.This increased inductance has several potential uses. One use is in power supplies, where it is used to store energy and to prevent high-voltage spikes due to its ability to slow down the current flow. It is also used in filters, where it is used to remove alternating signals above or below a certain frequency. It can also be used as a part of a resonance circuit, where it is used to create oscillations at specific frequencies. The SP1210-683G is also suitable for use in high-speed communication systems. The high-frequency signals involved in these systems can cause interference if the right components are not used. The SP1210-683G is designed to reduce this interference by dampening the frequency of the high frequency signals. The SP1210-683G is available in a variety of package sizes, and is suitable for both through-hole and surface-mount applications. It is very reliable and offers excellent signal integrity, making it an ideal choice for high-frequency signal routing applications and other high-speed digital signal applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description