SP3223ECY-L/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In today’s high-tech world, it is essential for data transmission to be efficient and reliable. This is achieved using driver/receiver/transceiver (DRT) devices. This article focuses on the SP3223ECY-L/TR, a low-voltage, low-standby-current, integrated 3.3V RS-485/RS-422 transceiver.

The SP3223ECY-L/TR is a low-power, integrated transceiver that is ideal for applications that require either RS-485 or RS-422 communications. With its low power consumption and wide digital logic levels, it is well suited for point-to-point, multipoint, and digital networking.

The device is composed of two parts; a driver section and a receive section. The driver section is composed of an operational amplifier that amplifies the voltage level and converts it to the desired Logic level. The receive section contains an operational amplifier that amplifies the desired Logic level to the desired voltage level. The two sections are connected via pins and can be configured to operate as either an RS-485/RS-422 driver/receiver or just a driver/receiver.

The SP3223ECY-L/TR is designed to operate from a single 3.3V supply and fully supports the TTL levels, LVTTL and the +3.3V CMOS level. It has an output voltage swing of 0V to +3.3V, with a low receive output impedance of approximately 600Ω and a high drive-output impedance of approximately 6.2kΩ. The device also features a low standby-current of approximately 500μA, and can support data rates up to 25Mbps.

The SP3223ECY-L/TR is ideal for use in applications that require low-power and low-cost interface solutions. It is highly suitable for automotive and industrial applications because of its low standby-current and wide digital logic levels. It is also suitable for applications such as RS-485/RS-422 sensor networks and can be used for further transmit and receive progress.

In conclusion, the SP3223ECY-L/TR is an ideal low-power, low-voltage, integrated 3.3V RS-485/RS-422 transceiver. It is designed to operate from a single 3.3V supply and features an output voltage swing of 0V to +3.3V, with very low standby-current and high data rates. It is suitable for many applications, including automotive and industrial applications, due to its low-power and low-cost advantages.

The specific data is subject to PDF, and the above content is for reference