Allicdata Part #: | 1866-4818-ND |
Manufacturer Part#: |
SPD-20-277P |
Price: | $ 11.73 |
Product Category: | Circuit Protection |
Manufacturer: | Mean Well USA Inc. |
Short Description: | LIGHTING SURGE PROTECTOR 277V |
More Detail: | N/A |
DataSheet: | SPD-20-277P Datasheet/PDF |
Quantity: | 1 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 10.65960 |
10 +: | $ 10.20600 |
25 +: | $ 7.93800 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Voltage: | 277V |
Moisture Sensitivity Level (MSL): | -- |
Technology: | Surge Protector |
Number of Circuits: | 2 |
Applications: | LED Drivers, AC/DC SMPS |
Mounting Type: | Screw |
Package / Case: | Module, Wire Leads |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Lighting Protection
The SPD-20-277P is a circuit protection device, specifically designed to protect circuits and equipment from damaging over-voltages and transients that can be caused by lightning. It can be used in a variety of applications such as communication systems, consumer electronics, and computer systems. In this article, we will discuss the application field and working principle of the SPD-20-277P.
Application Field
The SPD-20-277P is designed for use in general low voltage circuits, such as those found in household electrical systems. It is designed to provide protection against over-voltages and transients that can be caused by lightning or surges on electrical circuits. It has a maximum voltage rating of 277 volts AC and can withstand up to 10 KiloVolt surges. The SPD-20-277P is UL Listed for UL1449 3rd edition Type 4. It is also UL listed for UL824 Type 2.
The SPD-20-277P is designed for use in a variety of applications such as:
- Home, office, and industrial electrical systems
- HVAC systems
- Computer and communication systems
- Lighting systems
- Appliances
- Security systems
The SPD-20-277P is suitable for indoor use only.
Working Principle
The SPD-20-277P is designed to provide protection against over-voltages and transients that can be caused by lightning or surges on electrical circuits. It works by using a device called a metal oxide varistor (MOV) to absorb and dissipate the transient pulses. The MOV acts like an electrical sponge, absorbing and dissipating surge energy until it cannot any longer.
The SPD-20-277P has two parts: the MOV and the surge protector. The MOV is connected in parallel with the power circuit, while the surge protector is connected in series. When an over-voltage or transient occurs, the MOV absorbs the transient energy, while the surge protector trips and breaks the circuit to protect downstream equipment from surge damage. The SPD-20-277P is designed to trip within 0.5 seconds of a transient and will reset itself when the over-voltage conditions dissipate.
The SPD-20-277P is designed to provide an economical solution for lightning protection of residential, commercial, and industrial electrical systems. It is reliable, easy to install, and UL Listed for Type 4 and Type 2 protection. It is also UL listed for UL824 Type 2 surge protection.
The specific data is subject to PDF, and the above content is for reference
SURGE PROTECTOR 5KA MNTR 277V
SURGE PROTECTOR 5KA MNTR 277V
SURGE PROTECTOR 5KA MNTR 240VAC
SURGE PROTECTOR 5KA MNTR 240VAC
LSP THERMALLY PROTECTED VARISTOR
LSP THERMALLY PROTECTED VARISTOR