SPHWW1HDNC28YHU32F

Current - Test:	720mA
Lens Type:	Flat
Light Emitting Surface (LES):	17.00mm Diameter
Height:	1.50mm
Size / Dimension:	21.50mm L x 21.50mm W
Features:	--
Viewing Angle:	115°
CRI (Color Rendering Index):	95
Current - Max:	1.3A
Lumens/Watt @ Current - Test:	106 lm/W
Voltage - Forward (Vf) (Typ):	35.5V
Temperature - Test:	25°C
Series:	LC026B
Flux @ Current/Temperature - Test:	2712 lm (2440 lm ~ 2983 lm)
Configuration:	Square
Wavelength:	--
CCT (K):	3500K 3-Step MacAdam Ellipse
Color:	White, Warm
Type:	Chip On Board (COB)
Moisture Sensitivity Level (MSL):	--
Part Status:	Not For New Designs
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SPHWW1HDNC28YHU32F

The SPHWW1HDNC28YHU32F is a type of LED lighting technology that encompasses a variety of components and systems. It involves the use of COBs, engine, and modules to provide a variety of lighting solutions. In this article, we will discuss the various applications and working principles of the SPHWW1HDNC28YHU32F.

Types of SPHWW1HDNC28YHU32F LED Lighting

The SPHWW1HDNC28YU32F LED technology is a family of products that includes a variety of components and systems. The main components include COBs (Chip-on Board), engine, and modules.

COBs (Chip-on Board)

COBs are the most important SPHWW1HDNC28YHU32F LED lighting components. They are typically composed of a light emitting chip on a ceramic substrate. The chip itself is held in place by a special adhesive. The substrate also has various terminals, which allow the light to be connected to a power source. The advantage of using COBs is that they can be very small and therefore, they can be used in places that would otherwise be difficult to reach. Additionally, they are energy efficient and can last a long time without needing replacement.

Engines

Engines are the main components of the SPHWW1HDNC28YU32F LED lighting system. They provide a way for the light to be distributed in a pre-determined pattern. Engines are composed of a housing and reflectors, as well as a driver and a filter. The driver is responsible for providing the light with the proper current, voltage, and dimming control. The filter is responsible for dictating the overall color of the light. Engines can also be used to provide directional and spotlight lighting.

Modules

Modules are the third main component of the SPHWW1HDNC28YHU32F LED lighting system. They provide the basic power interface that is necessary to drive the LEDs. A module can include a driver, a heatsink, and other components. The driver, which is usually a DC-DC converter, is responsible for providing the LED with the proper current and voltage. The heatsink is necessary in order to dissipate the heat generated by the LED. The rest of the components in the module can vary depending on the complexity of the system.

Applications of SPHWW1HDNC28YHU32F LED Lighting

The SPHWW1HDNC28YHU32F LED lighting system has a variety of applications. It can be used for illumination, display lighting, and other general lighting purposes. It is also suitable for accent lighting and architectural applications. Outdoor lighting is also possible with this system, as it produces a wide range of color temperatures and dimming control. Additionally, with its modular components, it is possible to configure a custom lighting solution that is tailored to the specific needs of the installation.

Working Principle of SPHWW1HDNC28YHU32F LED Lighting

The working principle of the SPHWW1HDNC28YHU32F LED lighting system is based on electrical current passing through the light emitting chips. The current is regulated by the driver, which is responsible for providing the proper current and voltage to the LEDs. The light is then reflected off of various surfaces to create the desired illumination pattern. The dimming and color temperature control is determined by the driver, filter, and other components of the lighting system.

Conclusion

The SPHWW1HDNC28YHU32F LED lighting technology is a versatile and reliable solution for a variety of lighting applications. Its components, such as COBs, engine, and modules, provide flexibility and power efficiency for a wide range of applications. The working principle revolves around the passing of electrical current through semiconductor material to create the desired effect. Whether it is accent lighting or general illumination, the SPHWW1HDNC28YHU32F LED lighting system provides an effective lighting solution that can meet the needs of any project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description