SPS-A100D-HAWS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Position Sensors - Angle, Linear Position Measuring covers a range of technologies used to accurately measure physical position and motion. One such technology is the SPS-A100D-HAWS (Hall Effect Angle and Width Sensing). This application is used in a variety of industrial, automotive, residential, and commercial applications including aerospace, robotics, medical, formula one racing, and experimental motor development.

The SPS-A100D-HAWS is a two-piece device consisting of a Hall effect module and an angle sensing plate. The hall effect module contains an electronic circuit board which is fed by an external power source. The angle sensing plate is an aluminum plate with one side coated with a conductive material. This allows electrical current to travel along the surface of the plate. The Hall effect module is then mounted onto the angle sensing plate and they are attached together using magnets.

When the external power source feeds the electronic circuit board, it produces a magnetic field in the vicinity of the angle sensing plate. This magnetic field causes an electrical current to flow along the conductive material on the angle sensing plate. This electrical current is then measured and converted into a digital signal which can be read and interpreted by the hall effect module and sent to an output device for use.

The SPS-A100D-HAWS can detect a change in angle up to a resolution of 0.1 degree. Its accuracy is approximately 0.2 degree and the maximum measurable angles can reach up to 180 degrees. The device can also measure the width of the conductive path on the angle sensing plate, allowing the application to determine the direction of the direction of the magnetic field and thus enabling the user to measure the angular velocity of the application.

The SPS-A100D-HAWS is ideal for applications such as motor control, robotic control, aerospace control systems, position feedback systems, vehicle control systems, factory automation, and any other application which requires accurate angular measurements. It is easy to install and use and can provide reliable and accurate measurements.

The SPS-A100D-HAWS is a versatile and reliable device which can provide accurate and reliable measurements in a wide variety of industrial and commercial applications. It is easy to set up and use and can provide accurate measurements over a wide range of angles. The device can be used in a variety of applications requiring accurate angular measurements and can work in conjunction with other sensing technologies to provide the user with an even more accurate and reliable solution.

The specific data is subject to PDF, and the above content is for reference