SQM200JB-220R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are found in a variety of electrical and electronic applications due to their relatively low cost, reliable performance, and ease of assembly. One type of Through Hole Resistor, the SQM200JB-220R, is a non-inductive resistor often used in protection circuits, high-current circuits, and compensating circuits.

The SQM200JB-220R is a radial-leaded resistor with a 22 ohm nominal value. It has two leads, an anode and a cathode, which protrude out of the body of the resistor. The resistor is made of a special ceramic material, which provides excellent thermal stability, low thermal resistance, and excellent electrical and mechanical strength. Its maximum rated power is 2.65 watts, and its temperature coefficient is 1 ppm/°C, making it well-suited for applications in high-temperature environments. The resistor also has a high maximum operating voltage of 3000 VDC, allowing it to be used in circuits with higher voltages.

In terms of working principle, the SQM200JB-220R resistor works in the same way as other Through Hole Resistors. It acts as a circuit element that limits current, voltage, and power levels across the element. As current passes through the resistor, a voltage drop is created across the device, and this voltage drop is proportional to the amount of current passing through it. This voltage drop is also known as the resistance, and it is measured in Ohms.

The SQM200JB-220R resistor is used in a wide variety of applications, including: protection circuits, high-current circuits, and compensating circuits. In protection circuits, the resistor can be used to limit current or voltage levels, thereby protecting other components from damage caused by excess current or voltage. In high-current circuits, it can be used to ensure that the current levels do not exceed an acceptable level. In compensating circuits, the resistor can be used to adjust the gain of an amplifier.

The SQM200JB-220R resistor is a reliable and cost-effective solution for various applications, providing users with excellent performance and a wide operating temperature range. Its radial-leaded design makes it easy to mount and install, making it an attractive option for many applications. As with all Through Hole Resistors, proper precautions should always be taken when handling and installing the SQM200JB-220R resistor, to ensure maximum performance and reliability.

The specific data is subject to PDF, and the above content is for reference