SQM200JB-33R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the most basic type of resistors in the electronics industry. They are very commonly found in circuits and can be used to control voltage and current levels in signals and devices. The SQM200JB-33R is a very popular type of through hole resistor, designed for applications in higher power electronics, such as motor control, power supply, and audio amplifier circuits.

The SQM200JB-33R through hole resistor is a relatively large component, designed to handle up to 250 watts of power. It is made up of an aluminum or copper housed resistor, with a threaded, two-terminal pin that connects to the external circuit. The terminal is usually coated with a protective oxide layer to reduce the current from transfer to the resistor body. The resistor is insulated from the external circuit with an epoxy coating, which increases the safety factor when working with high voltage. This resistor type is typically used with PoE (Power over Ethernet) and LED light applications. The SQM200JB-33R is also available in several different sizes, depending on the application and requirements.

The working principle of the SQM200JB-33R is simple and similar to other through hole resistors. It works by limiting the current that passes through the resistor, to prevent an overload on the device or circuit. When a current is applied to one of the terminals, the voltage drop is then measured across the other terminal. The amount of voltage drop is dependent on the value of the SQM200JB-33R resistor, and can be adjusted by simply changing the resistor value. The internal resistance value is usually calculated in ohms, and is printed on the body of the resistor for easy tracking.

When connecting the SQM200JB-33R to a circuit, it is important to ensure that the voltage being applied to the resistor does not exceed the maximum voltage rating, as this may cause damage to the resistor and the surrounding circuit. For safety, it is also important to use appropriate wiring and connections to the external circuit in order to ensure a safe and reliable connection.

The SQM200JB-33R through hole resistor is a very useful component in high power electronics. Its simple working principle and wide range of sizes make it an ideal choice for a variety of applications, including power over Ethernet (PoE), LED light circuits, and motor control systems. It is important to remember to properly attach the voltage level to the resistor, as well as use appropriate wiring and connections to the external circuit in order to maximize safety and performance.

The specific data is subject to PDF, and the above content is for reference