SQM48T25010-PCAP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are an important part of modern power systems, providing an efficient way to convert power from an AC or DC source to an isolated DC voltage. The most common type of DC DC converter is the switch mode power supply (SMPS). The SQM48T25010-PCAP is a DC DC converter that provides up to 18V at 1A from a single 12V or 24V supply. This device is suitable for a range of applications, including lighting systems, industrial electronics, automotive electrification, HVAC, and power tools.

The SQM48T25010-PCAP utilizes a Pulse Width Modulation (PWM) topology to convert the input voltage to a desired output voltage. The device is designed with integrated protection circuits to prevent conflicts between output voltages and prevent overloads. It is also designed with an optimized switching frequency to reduce power consumption and minimize EMI noise. In addition, the PCB design of the converter is optimized to reduce board size and cost while also improving reliability.

The working principle of the SQM48T25010-PCAP revolves around the Pulse Width Modulation (PWM) topology. The first stage of the system is the input stage. This stage takes the 12V or 24V input voltage and steps it down to reduce the power consumption of the converter. The switching frequency, which is the rate at which the switches are activated, can be configured to a specific value in order to optimize the efficiency of the converter.

The second stage of the system is the voltage control logic. This stage determines the output voltage of the converter using the PWM signal from the input stage. The output voltage is adjusted by changing the duty cycle of the PWM signal, causing the output voltage to rise and fall in relation to the duty cycle. The switches are activated again to maintain the output voltage at the desired level.

The third stage of the system is the output stage. This stage is responsible for providing the required output voltage. The output stage is controlled by the voltage control logic and uses MOSFETs to switch the output voltage. The output voltage is regulated by a feedback loop to ensure that it remains at the desired level. Additionally, integrated protection circuits are used to protect the system from overloads and short circuits.

The SQM48T25010-PCAP is a DC DC converter that provides up to 18V at 1A from a single 12V or 24V supply. This device is designed for use in a range of applications, including lighting systems, industrial electronics, automotive electrification, HVAC, and power tools. The converter utilizes a Pulse Width Modulation (PWM) topology to convert the input voltage to a desired output voltage. The output voltage is regulated by a feedback loop and protection circuits are included to protect the system from overloads and short circuits.

The specific data is subject to PDF, and the above content is for reference