SQP10AJB-510R

Series:	SQP
Packaging:	Bulk
Part Status:	Active
Resistance:	510 Ohms
Tolerance:	±5%
Power (Watts):	10W
Composition:	Wirewound
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.374" x 0.354" Rectangular x 1.890" L (9.50mm x 9.00mm x 48.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors (SQP10AJB-510R) Through hole resistors are components that are used in the design of electric circuits to provide a means of resistance to the flow of current in a device.They are commonly used in order to control and regulate various levels of power in a circuit. Through hole resistors are usually designed to withstand high voltages. They usually exhibit relatively low thermal coefficient of resistance (TCR) values, meaning that they maintain a steady resistance level even when exposed to high temperatures.The SQP10AJB-510R is a through hole resistor that is rated for 10W of power. It is constructed with a 1/4W chip and is designed to reduce power loss in high voltage applications. The resistors are made with 2% tolerance which ensures accurate measurements within a long service life. The resistor is also equipped with a UL94-V0 flammability rating for superior resistance to heat and fire. The SQP10AJB-510R is an L-shaped resistor constructed of a ceramic body and a metallized conductor element. The ceramic body functions as an insulator for the internal parts of the resistor, while the conductor element ensures consistent resistance values over its operating temperature range. The positive contact is a flat tab and the negative contact features a through hole. The through hole helps maintain a good electrical connection to the external circuit, while also allowing the resistor to be securely soldered to the board.The resistors are designed to provide accurate and reliable performance over a wide range of current ratings and power levels. The operating temperature range of the SQP10AJB-510R is from -55°C to +150°C. The terminations are designed to withstand temperatures up to +230°C for up to 10 seconds without suffering damage.The external circuit connected to the SQP10AJB-510R is typically designed to supply the power or voltage required to achieve the desired level of resistance. This signal is then passed through the resistor, creating a level of resistance between the terminals based on the voltage or current applied. A current flowing through the resistor will generate heat because of the voltage drop across it. This is referred to as ohmic heating and is proportional to the square of the current.The SQP10AJB-510R is ideal for use in high voltage applications, as it is capable of withstanding up to 10W of power. It is also designed to maintain a low thermal coefficient of resistance (TCR) and is compliant with UL94-V0 flammability safety standards. Its through hole design allows for secure soldering to the board and makes it an ideal choice for high power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description