![SR-5-2.5A-AP Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SR-5-2.5A-AP Circuit Protection |
|
Allicdata Part #: | 283-2573-3-ND |
Manufacturer Part#: |
SR-5-2.5A-AP |
Price: | $ 0.00 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | FUSE BOARD MOUNT 2.5A 250VAC RAD |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Package / Case: | Radial, Can, Vertical |
DC Cold Resistance: | 0.024 Ohms |
Size / Dimension: | 0.335" Dia x 0.319" H (8.50mm x 8.10mm) |
Color: | -- |
Operating Temperature: | -40°C ~ 85°C |
Approvals: | CCC, cULus, KC-MARK, PSE, SEMKO, VDE |
Melting I²t: | 45 |
Breaking Capacity @ Rated Voltage: | 35A |
Mounting Type: | Through Hole |
Series: | SR-5 |
Response Time: | Slow |
Voltage Rating - AC: | 250V |
Current Rating: | 2.5A |
Fuse Type: | Board Mount (Cartridge Style Excluded) |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tape & Box (TB) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SR-5-2.5A-AP fuse is a type of fuse that is specifically designed for electrical applications. It is a high breaking capacity fuse that provides a fast and reliable protection for a variety of electrical applications. This fuse is rated for a current of 2.5A and a voltage of 250V AC.
The SR-5-2.5A-AP fuse is a one-time, non-resetting fuse. It is designed to be used in a variety of applications in both single-phase and three-phase applications. It is suitable for the protection of low voltage alternating current circuits, including motor circuits, power supplies, and other general power line applications.
The primary purpose of this type of fuse is to limit the current and protect the equipment from dangerous overloads. When the circuit is overloaded, the internal element inside the fuse melts, breaking the circuit and protecting the equipment. The melting point of the internal element in this fuse is 250V AC, which is capable of protecting equipment from the most common overcurrents. This fuse also has a fast response time, which helps to provide a quick interruption of the current.
To ensure that the fuse works properly, it is important to choose the right size. The size of the fuse must be chosen based on the current that is likely to flow through the circuit. Using a fuse that is too large or too small can cause a dangerous situation. There are charts available that allow you to choose the right size for your particular application.
The SR-5-2.5A-AP fuse is designed to be used in a variety of electrical applications. It is suitable for the protection of low voltage alternating current circuits, including motor circuits, power supplies, and other general power line applications. It is important to make sure that the size of the fuse is chosen correctly so that it can provide adequate protection for the equipment.
The specific data is subject to PDF, and the above content is for reference
FUSE BRD MNT 1.6A 125VAC/VDC SMD
![3404.0011.11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
FUSE BOARD MNT 3.15A 125VAC/VDC
![2060.0048.11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
FUSE BOARD MNT 350MA 125VAC/VDC
![2060.0043.11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
FUSE BRD MNT 2.5A 125VAC/VDC SMD
![2060.0013.11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
FUSE BRD MNT 1.6A 125VAC/VDC SMD
![2060.0011.11 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
FUSE BOARD MNT 1A 250VAC RADIAL
![2040.0715 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)