SS-5H-1.25A-BK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are as important to a circuit as the famous “big three” of wires, connectors, and switches. In the event of an electrical overload or over current, fuses protect the circuit by preventing a damaging burst of current from running throughout it. Whether the fuse is a conventional time delay fuse, a fast-acting blade fuse, or a high-amperage fuse, the concept behind fuse operation is the same - when too much electrical current passes through it, the heat generated by the current causes it to melt and open the circuit, thus preventing the wiring, components, and circuit board from suffering any damage.

SS-5H-1.25A-BK is a high-amperage fuse with a rated current of 1.25 A. It is commonly used in industrial applications, such as testing and protecting high power electronics, electronic components, control circuits, power supplies, and other electrical equipment. It has been specifically designed to protect circuits from short-circuiting or large current overloads.

This type of fuse operates on a simple principle. When a pre-set amount of current flows through it, the wires within the fuse will heat up and eventually cause the conductivity of the fuse to weaken. If the pre-set current is exceeded, the heat generated by the current will reach a point where the wires in the fuse will melt and disconnect the circuit, preventing further damage from occurring to the components and wires in the circuit.

For a reliable application, SS-5H-1.25A-BK should be used in combination with a fuse holder designed for these fuses. The fuse holder ensures that the fuse is in proper alignment with the circuit and provides an easy way to switch the fuses in and out when necessary. It is also necessary to place the fuse in the correct position inside the device; otherwise, the device could be damaged by a short circuit.

Care should be taken when selecting the correct type of fuse for any project. Choosing the wrong fuse may result in an inadequate level of protection for the circuit, or in over-protection, in which case the device may be shut down without providing enough protection.

Whether you are using a SS-5H-1.25A-BK or any other type of fuse, understanding its application field and working principle is essential for proper electrical protection. By taking the time to select the right fuse and understanding how it works, you can provide the best protection for your projects and protect your equipment from potential damage.

The specific data is subject to PDF, and the above content is for reference