SSHB10H-08082

Voltage Rating - AC:	250V
Package / Case:	Vertical, 4 PC Pin
Height (Max):	0.610" (15.50mm)
Size / Dimension:	0.866" L x 0.669" W (22.00mm x 17.00mm)
Mounting Type:	Through Hole
Features:	--
Approvals:	--
Ratings:	--
Operating Temperature:	-25°C ~ 120°C
Series:	SSHB10H
Voltage Rating - DC:	--
DC Resistance (DCR) (Max):	640 mOhm
Current Rating (Max):	800mA
Inductance @ Frequency:	8.2mH @ 10kHz
Number of Lines:	2
Filter Type:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes refer to an electrical filter that blocks high frequency noise from passing through it, while allowing the desired signal to pass through. The SSHB10H-08082 is a common mode choke designed to be used in a variety of different applications in order to reduce EMI (electromagnetic interference). It is specifically designed to meet aggressive electromagnetic interference (EMI) requirements while achieving maximum signal-to-noise ratio (SNR).The SSHB10H-08082 consists of two shielded coils placed closely together, typically wound with a high-conductivity material. This allows the SSHB10H-08082 to concentrate the current flowing through it in both directions, thereby increasing the effective shielding ratio (SR) of the device. The two shielded coils are designed to capture and filter out unwanted high-frequency noise while allowing desired low-frequency signals to pass through with minimal alteration.The SSHB10H-08082 has a wide variety of applications. It can be used in automotive and telecommunications equipment, power supplies, and various other consumer electronics. In these applications, it reduces the amount of radio frequency interference (RFI) and electromagnetic interference (EMI) that can negatively affect the performance of the device. Additionally, the SSHB10H-08082 helps maintain signal integrity by providing isolation between multiple circuits, such as power and signal lines.The SSHB10H-08082 works on two main principles: inductive and capacitive coupling. Inductive coupling works by creating a magnetic field around the device, which serves to disrupt the flow of high-frequency noise. Capacitive coupling works by creating an electrical field around the device, allowing the desired low-frequency signals to freely pass through without interference.In order to maximize its effectiveness, the SSHB10H-08082 must be properly installed. It should be placed close to the source of the EMI, and the leads should be properly routed and shielded to avoid interference with other lines. Additionally, the shielding should be securely grounded to ensure that the shielding material is effective. Finally, the SSHB10H-08082 should be properly sized to ensure that the amount of high-frequency noise is filtered appropriately.Overall, the SSHB10H-08082 is an effective solution for reducing EMI in a variety of applications. It is designed with both inductive and capacitive coupling, which ensures that high-frequency noise is blocked, while desired low-frequency signals are allowed to pass through without interference. Additionally, proper installation of the SSHB10H-08082 is key to maximizing its effectiveness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description