SSHB10H-10064

Voltage Rating - AC:	250V
Package / Case:	Vertical, 4 PC Pin
Height (Max):	0.610" (15.50mm)
Size / Dimension:	0.866" L x 0.669" W (22.00mm x 17.00mm)
Mounting Type:	Through Hole
Features:	--
Approvals:	--
Ratings:	--
Operating Temperature:	-25°C ~ 120°C
Series:	SSHB10H
Voltage Rating - DC:	--
DC Resistance (DCR) (Max):	480 mOhm
Current Rating (Max):	1A
Inductance @ Frequency:	6.4mH @ 10kHz
Number of Lines:	2
Filter Type:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes

Common Mode Chokes is a form of electromagnetic field suppression which uses the impedance of an inductor to reduce the high frequency current running through a pair of cable conductors which are otherwise susceptible to external noise. The SSHB10H-10064 is a common mode choke designed for high frequency noise interference suppression such as telecom applications.Common mode chokes are used to prevent high frequency currents from running through cables carrying signals, resulting in improved signal integrity and reduced noise. The SSHB10H-10064 is a common mode choke designed for high frequency noise interference suppression in telecom applications, such as telephone, DSL, satellite TV and portable devices.The SSHB10H-10064 is a surface mounting common mode choke with high impedance in the range of 1MHz-100MHz. The choke is built using ferrite beads and magnetic windings, and is rated for up to 124 volts/40 amps. It features a low profile design to provide efficient space management and easy installation.The SSHB10H-10064\'s working principle is based on the fact that current flows in the same direction through both ends of the choke. It produces an inductive electromagnetic field around the cable conductors, which acts to suppress high frequency noise. The choke\'s impedance limit current flowing along the cable, allowing only low-frequency current to pass, and thus reducing interference caused by outside sources, such as cell phones, computers, and other electronic devices. The choke also reduces common mode noise, which is any noise on both lines of the main power source.Common mode chokes are commonly used in a variety of applications, such as telecommunications, automotive, and consumer electronics. They are typically used in antennas, power supplies, and other sensitive circuits which are prone to increasing levels of high frequency noise as technology advances.The SSHB10H-10064 is an excellent choice for any telecom application where high frequency noise suppression is necessary. It is designed to provide superior noise suppression in a variety of conditions, while offering a low profile design and ease of installation. With its high impedance in a range of 1MHz-100MHz, the SSHB10H-10064 is ideal for any application that requires high frequency noise suppression.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description