SWC-3.00-25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are power transmission components used to store and release electrical energy in circuits. They are typically made from coils of wire wrapped around a core of metal to create a loop with a specific inductance. The inductor\'s inductance depends on the number of turns in the coil, the size of the core, and the type of metal it is made from. SWC-3.00-25 is a fixed inductor that is used in various applications.

The SWC-3.00-25 is a wire-wound power inductor. It has a 3.0 mm diameter. It is 25 mm long and it has 29 turns. The inductance of the SWC-3.00-25 is rated at 3.0 mH ±20%. It also has a current rating of 0.76 A. The inductor is made of a ferrite core and copper wire. It has an insulation resistance of 100 MΩ min and a temperature coefficient of 0.4% per °C. It has a typical DC resistance of 0.18 Ω and a maximum DC resistance of 0.27 Ω. The SWC-3.00-25 has a saturation current of 1.48 A and a self-resonant frequency of 18 MHz.

The SWC-3.00-25 inductor has a variety of applications. It is commonly used in DC/DC conversion circuits, power supplies, filters, voltage regulators, and automotive electronic circuits. Additionally, it can be used as an output inductor for DC/AC inverter circuits. The SWC-3.00-25 is able to handle both low current and high current loads. It is a reliable and efficient inductor for any application that requires electrical energy storage.

The working principle of SWC-3.00-25 is based on Faraday\'s Law of Induction. When an electric current passes through a coil of wire, it generates a magnetic field. This magnetic field then induces a voltage across the coil in the opposite direction. This voltage is called the back EMF. The magnitude of the back EMF is proportional to the rate of change of the current, which in turn is determined by the inductance of the coil. The SWC-3.00-25 has a specific inductance value, which determines the magnitude of the back EMF generated.

In summary, the SWC-3.00-25 is a fixed inductor that is used in a variety of applications. It has a diameter of 3.0 mm, a length of 25 mm, and 29 turns. Its current rating is 0.76 A, its resistance is 0.18 Ω, and its saturation current is 1.48 A. The SWC-3.00-25 inductor works on Faraday\'s Law of Induction and produces a back EMF in response to any changes in the current passing through its coil.

The specific data is subject to PDF, and the above content is for reference