SY100E122JC

Series:	100E
Packaging:	Tube
Part Status:	Discontinued at Digi-Key
Logic Type:	Buffer, Non-Inverting
Number of Elements:	9
Number of Bits per Element:	1
Input Type:	--
Output Type:	Push-Pull
Current - Output High, Low:	--
Voltage - Supply:	-4.2 V ~ -5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	28-LCC (J-Lead)
Supplier Device Package:	28-PLCC (11.5x11.5)
Base Part Number:	100E122

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers
The SY100E122JC is a high-speed, low-power integrated circuit that has a wide range of uses in modern digital electronics. It is a field-effect transistor (FET) output buffer/driver headsupplied in a 5-pin plastic surface-mount package, and is widely used in many different applications, such as buffering and fan speed regulation control.The SY100E122JC is able to perform many different tasks due to its wide range of features, such as its 10kOhm resistance, 10V maximum voltage, 15mA current capacity, and a maximum frequency of 400MHz. All of these features combine to make the SY100E122JC an ideal choice for many applications, and its high speed makes it ideal for use in high-frequency, high-data applications.The SY100E122JC can be used as a buffer, as a driver, or as a receiver/transceiver. As a buffer, it can be used to buffer signals received from other components and then pass them to their designated destinations. This is typically used for data transmission and fits into systems with varying voltage signals. When used as a driver, the SY100E122JC can be used to drive higher voltage signals from one point to another in applications where more power is needed.As a receiver/transceiver, the SY100E122JC can be used to receive data from an external source, process it, and then pass it on to other applications. This is particularly useful for communication systems where the data needs to be processed for any errors before it is passed on. The receiver/transceiver aspect of the SY100E122JC also makes it ideal for mesh networks where small volumes of data need to be transmitted quickly between nodes.The working principle behind the SY100E122JC is based on the rudimentary principle of electrical conduction in semiconductors. The main component of the SY100E122JC is the field-effect transistor, or FET, which acts as a non-linear switch between two electrical components. The FET is composed of various materials, such as silicon and aluminum, which allow for a variety of functions to be achieved.When the SY100E122JC is active, the gate voltage typically rises above the source voltage, allowing the current to flow between the source and the drain. This flow of current is then further regulated by the input and output resistors, which enable the voltage levels to be controlled depending on the requirements of the application.In conclusion, the SY100E122JC is a versatile, high-speed, low-power integrated circuit with a wide range of applications. It can be used as a buffer, a driver, or a receiver/transceiver. Its main component is the FET, which makes use of the rudimentary electrical conduction principles found in semiconductors. Its 10V maximum voltage, 15mA current capacity, and 400MHz maximum frequency provide a wide range of capabilities for different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description