SY10E166JZ-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SY10E166JZ-TR falls under the Logic Comparators category. It is a dual differential comparator that has a supply voltage ranging from 3.0V to 6.75V with a maximum differential input voltage of 13V and a maximum common mode voltage of 8.25V. It is also equipped with an offset voltage of 130mV and high-speed operation. The SY10E166JZ-TR is used for wide variety of applications where power consumption is not a major issue such as high-speed, high-accuracy signal processing, signal amplification, signal buffering, and data conversion.

The SY10E166JZ-TR is mainly designed for applications in signal comparison and amplifying, where it is able to detect weak signals, compare signals in a large voltage swing and amplify them. It is able to detect a small signal shift on an input data. This makes it ideal for applications where a signal comparison is involved such as an Analog to Digital Converter, a Voltage Booster, or a High Current Comparator.

The advantage of the SY10E166JZ-TR is that it has a low offset voltage of 130mV and a high-speed operation of 4.5MHz at VCC=3.3V. It also minimizes the delay time between an input differential signal with its outputs. This makes it suitable for few milliseconds applications such as single supply applications, voltage booster, and amplifiers.

The SY10E166JZ-TR is designed to detect low level signals without being affected by the common mode voltage. It has a differential input range of 13V which allows it to be used for high accuracy data conversion and voltage booster.

The operating principle of the SY10E166JZ-TR is based on a negative feedback loop that is connected from one output terminal to one of the two input terminals. When the voltage at the inverting input is higher than the other input, the positive output will be pulled down and the negative output will be pulled up. This device also have an input bias current which can be minimized by choosing suitable gate material.

The SY10E166JZ-TR is ideal for applications that require an accurate comparator circuit that can process high-speed, high-accuracy signals. It is well suited for applications such as low power amplifiers, data acquisition and communication systems, logic noise suppression, and Analog to Digital Converters.

The specific data is subject to PDF, and the above content is for reference