SY88822VKG-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SY88822VKG-TR is an IC from Infineon and belongs to their line of PMIC – laser drivers. It is capable of driving laser diodes up to 1.5A output current with a wide range of features for various applications.

Since laser diodes are very sensitive and need to be protected, this driver is designed with an integrated over-current protection (OCP) and short-circuit protection (SCP). The chip also provides thermal shutdown to protect against overheating, which can lead to degradation or complete breakdown of the diode. In addition, the SY88822VKG-TR offers a wide range of low-noise noise slope to accommodate different running conditions. It also has adjustable rise and fall times, allowing different laser performances to be set.

The ground-signal pin can be used to synchronically switch a laser diode. This pin is connected to the input voltage monitoring circuit and can be used to use an external signal to control the speed of the laser driver. The open source pin allows a feedback signal from the lase diode’s anode to be processed by the circuit for more control over the laser driver’s performance.

The SY88822VKG-TR also includes a pre-bias circuit for high-power laser applications. It allows for setting of an initial current at the time of laser activation. This feature makes the drivers more suitable for high-power applications as they can be used with low-voltage supplies.

The SY88822VKG-TR can be used in many applications, such as laser cutting, welding, and engraving. All of these applications require constant and accurately controlled high-power laser diodes which can be enabled by the SY88822VKG-TR with its wide variety of accurate and safety-enhancing features.

To sum up, the SY88822VKG-TR is a suitable IC for driving laser diodes up to 1.5A output current. It comes with an integrated over-current protection (OCP) and short-circuit protection (SCP), as well as other features such as a wide range low-noise noise slope, adjustable rise and fall times, a ground-signal pin to use an external signal for control of the speed of the laser driver, and a pre-bias circuit for high-power laser applications. It is suitable for many applications such as laser cutting, welding, and engraving.

The specific data is subject to PDF, and the above content is for reference