T101SHCQE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggleswitches can be seen in everyday applications, ranging from simpleon/off mechanisms, to complex computers and robotics systems. T101SHCQEis the model of a cam operated rached toggle switch; it is classified asa single pole, single throw (SPST) switch. This article will explainthe application field and working principle of T101SHCQE.

T101SHCQE toggle switches are used for low current switching incircuit boards, such as mobile phones, touch screens and otherconsumer electronics products. It is most commonly used in missioncritical tasks such as circuit switching, overtemperatureprotection and sensor activation. The switch itself is rated for upto 3 amps at 12 volts, and can handle loads up to 1.6 pounds. Thismakes it suitable for a wide range of domestic products.

The working principle of the T101SHCQE switch involves a cam androller mechanism. A cam is attached to a plunger, which raises andlowers with the motion of a lever connected to an actuator. When theplunger is raised, the roller on the switch is forced against thecontact in the opposite direction, closing the switch. When theplunger is lowered, the roller is released and the switch is openedagain. The motions of the plunger and roller are transferred throughthe lever and the actuator; this causes the switch to be engaged anddisengaged.

The toggle switch can be used in a variety of situations; it is alsosuitable for a wide range of temperature ranges, up to 250°F. T101SHCQE switches are typically used in applications where simpleswitching is required, but can also be used for applications wheremultiple switching cycles are required. In addition, the toggle switchis suitable for applications where the switch needs to be engaged anddisengaged quickly and reliably.

In summary, T101SHCQE toggle switches are a reliable and efficientway of switching between two states. They are commonly used in a rangeof low current applications, such as circuit switching, over temperatureprotection and sensor activation. The switch is rated for up to 3amps at 12 volts, and can handle loads up to 1.6 pounds. It is alsoable to operate in a wide range of temperatures, up to 250°F. Itsworking principle involves a cam and roller mechanism, where aplunger is used to force the roller against the contact, closing theswitch. Finally, the switch is suited to both simple and multiple switching cycles, and can be used with confidence in mission criticaltasks.

The specific data is subject to PDF, and the above content is for reference