T11-1-3.00A-01-10

Series:	SNAPAK®
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	3A
Number of Poles:	1
Actuator Type:	Toggle
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit BreakersA circuit breaker is a device used to protect electrical circuits from damage caused by over-load and short-circuits. The T11-1-3.00A-01-10 circuit breaker is a high-performance, reliable, and cost-effective circuit breaker. It is used for protecting multiple types of circuit such as cables, wires, and other electrical components from possible damages caused from unexpected over current or an abnormally high current. Application FieldThe T11-1-3.00A-01-10 circuit breaker is used for commercial and residential applications. It is commonly installed in places where high levels of protection are needed, such as factories and industrial facilities. This type of breaker is also used in applications such as motors, air-conditioners, electric boilers, and other consumer appliances. The T11-1-3.00A-01-10 circuit breaker is also suitable for use in low voltage systems. Its applications include home and office wiring, power circuits, signal systems, electric vehicle charging systems, and automation control systems. It can protect against short-circuit, overload, over-voltage, leakage, and electric shock caused by improper wiring and overvoltage. Working PrincipleThe basic working principle of the T11-1-3.00A-01-10 circuit breaker is to automatically cut off the electrical supply during a fault. A properly functioning circuit breaker will detect excessive current, or any other abnormal conditions, and open the breaker to prevent potential damage. Most circuit breakers come with overload protection. There are two types of overload protection: thermal overload protection and magnetic overload protection. Thermal overload protection works by using a thermostat or heat element to detect excessive temperatures that may cause damage. The thermostat or heat elements will automatically open the circuit breaker when the temperature exceeds a set threshold. Magnetic overload protection uses a magnetic element to detect excessive currents. When an abnormal current is detected, the magnetic element will cause the circuit breaker to trip and open the circuit. The T11-1-3.00A-01-10 circuit breaker also offers short circuit protection. A short circuit will occur when the current flowing through the circuit exceeds the expected level; the short circuit protection feature of the circuit breaker will detect this and open the circuit. This causes the current flow to be cut off, thereby protecting the circuit and any equipment connected to it.ConclusionThe T11-1-3.00A-01-10 circuit breaker is a reliable, cost-effective, and high-performance circuit breaker. It is used for protecting multiple types of circuits from possible damages caused from unexpected over current or an abnormally high current. It is commonly used in commercial and residential applications, as well as in low voltage systems such as home and office wiring, power circuits, signal systems, electric vehicle charging systems, and automation control systems. The working principle of the T11-1-3.00A-01-10 circuit breaker is to automatically cut off the electrical supply during a fault, using thermal or magnetic overload protection, as well as short circuit protection.

The specific data is subject to PDF, and the above content is for reference