T11-2-3.00A-01-10

Series:	SNAPAK®
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	3A
Number of Poles:	1
Actuator Type:	Toggle
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<>

Introduction

Circuit Breakers are devices designed to isolate and protect electrical systems from short circuit and overload fault conditions. They are typically used in residential, commercial and industrial electrical systems, and in various other applications. The T11-2-3.00A-01-10 is a three-pole circuit breaker that is used for the protection of enclosed installations. This circuit breaker is suitable for use in both commercial and residential applications. In this article we will take a look at the application field and working principle of this circuit breaker.

Application Field

The T11-2-3.00A-01-10 circuit breaker is designed to provide protection against both overload and short circuit faults in electrical systems and equipment. It is suitable for use in both residential and commercial environments, and can be used in installations such as:• Air conditioning systems• Light fixtures• Air compressors• Elevators and escalators• Electric motors• Transformers• Industrial equipment• Electrical items used in hazardous locationsThe T11-2-3.00A-01-10 circuit breaker also offers protection against phase to phase and phase to ground faults, making it an ideal solution for most electrical systems.

Working Principle

The T11-2-3.00A-01-10 circuit breaker is a three-pole device that uses two thermal-magnetic trip modules. It works by monitoring the current in the circuit and will trip open the circuit if the current exceeds a pre-set level. The two thermal-magnetic trip modules work together to provide protection against both overload and short circuit faults.When the current exceeds a pre-set level, the thermal overload relay will trip open the circuit breaker. This is done through the use of a melting bimetallic strip, which acts as a heat sink and responds to current surges or prolonged periods of overloading.At the same time, the magnetic trip module will sense the excessive current and will trip open the circuit quickly. If the current exceeds a certain value, the trip coil will activate and the armature will open the circuit. This helps to protect the system and equipment from short circuit faults.

Conclusion

The T11-2-3.00A-01-10 circuit breaker is an ideal solution for both residential and commercial applications. It is designed to provide protection against both overload and short circuit faults, and is equipped with two thermal-magnetic trip modules for added protection. The T11-2-3.00A-01-10 is suitable for use in a wide variety of installations, making it a reliable and cost-effective solution for most applications.

The specific data is subject to PDF, and the above content is for reference