T540B476K006CH86107610

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

T54XB476K006CH86107610 is a tantalum – polymer capacitor which has been designed for use in high frequency and high performance circuits. A tantalum – polymer capacitor is a solid-state device made up of a thin film of dielectric material, normally a thin-film polymer and electrolyte, between two electrodes, one of which is usually made from tantalum. This type of capacitor offers many benefits compared to other traditional capacitors; it’s a highly reliable device and offers a good impedance and frequency response. The T54XB476K006CH86107610 can be used in many different applications, including high frequency communication, signal conditioning, and multiplexing, where more than one signal source is combined into one signal.

In RF signal processing, a good capacitor value is required to ensure a good frequency response. Tantalum - polymer capacitors have very low ESR (Equivalent Series Resistance) values which gives them a wide frequency range, as well as a low THD (Total Harmonic Distortion), making them ideal for high frequency signal processing applications. The T54XB476K006CH86107610 has a large capacitance of 4.76uF, making it useful for high frequency signal conditioning and multiplexing, as well as providing a good signal-to-noise ratio.

The working principle of the T54XB476K006CH86107610 is based on capacitance. This type of capacitor has an insulating polymer as the dielectric material, and the two electrodes are connected to each other through a conducting material such as tantalum. In this arrangement, the electrons of the two electrodes create a charge that is proportional to the applied voltage. This charge is the basis for the primary working principle of a capacitor – storing electrical energy. So, when a voltage is applied across the electrodes, the resulting charge stores energy, and this stored energy is then released when the applied voltage is removed. This energy release occurs between the two electrodes, as the electrons move to balance the charge between them. This cycle is then repeated until the capacitor is discharged, or until a new voltage is applied across the electrodes.

Tantalum - polymer capacitors have many advantages over traditional capacitors such as low ESR, increased reliability and a good frequency response. The T54XB476K006CH86107610 is a high quality device perfect for high frequency signal processing circuits, and its 4.76uF capacitance value makes it useful for signal conditioning, multiplexing and other related applications. The working principle of the device is based on capacitance, where a charge created by the two electrodes stores energy. This energy is released when the applied voltage is removed, and the cycle is then repeated until the capacitor is discharged or a new voltage is applied.

The specific data is subject to PDF, and the above content is for reference