T540D226M030BH8505

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum-Polymer capacitors are solid-state electrolytic capacitors with an anode made of tantalum, a conductive polymer as the electrolyte and a porous tantalum or hard-pressed manganese dioxide as the cathode. They are widely used in electrical and electronic systems and are primarily used as decoupling capacitors, providing low impedance power supply noise filtering, and in high frequency applications, particularly those involving switching and radio frequencies. They have many advantages over other types of capacitors, including low ESR and ESL, good temperature and voltage stability, and high reliability.

One of the most popular tantalum-polymer capacitors on the market is the T540D226M030BH8505. This capacitor has a capacitance of 22μF, a voltage rating of 6.3V, a tolerance of ±20%, and a resistive ESR of 0.030Ω. It also has a maximum ripple current of 0.9A, allowing it to run with high efficiency at frequencies up to 20 kHz. The T540D226M030BH8505 is a common choice for high power applications, owing to its low inductance and excellent noise rejection.

The T540D226M030BH8505 is typically used in communications and networking equipment, where it can be used for power supply decoupling, signal filtering, and signal integrity functions. It can also be used in military and avionics applications, such as communication and navigation systems. Its low ESR, excellent tolerance, and high voltage and current ratings make it well-suited for a variety of demanding applications. Furthermore, it is RoHS compliant, so it can be used in a variety of applications without fear of damaging the environment.

The working principle of the T540D226M030BH8505 capacitor is based on the principle of electrostatic charge storage. When connected in series with a voltage source, the capacitor builds an electric field between two conducting plates separated by an insulating material, known as the dielectric. The capacitor stores a charge when an electric potential is applied across its two terminals, corresponding to the voltage supplied to the circuit. This stored charge is the capacitance, measured in Farads. As the capacitance increases, the amount of charge stored increases, allowing the capacitor to act as a filter.

The T540D226M030BH8505 is uniquely suited for power supply decoupling and signal filtering applications due to its ability to quickly charge and discharge as voltages fluctuate in the circuit. During periods of low voltage, the capacitor stores the energy and then draws it off during periods of high voltage, smoothing out the voltage level and preventing circuit damage. This makes it ideal for use in high-frequency switching applications, where sudden voltage fluctuations can cause damage to the circuit if not properly addressed.

The T540D226M030BH8505 is an excellent choice for high power, high temperature, and high frequency applications. It is a reliable, low-cost solution to power supply decoupling and signal filtering, as well as a wide range of other demanding applications. With its low ESR and tolerance, excellent temperature and voltage stability, and high reliability, it is one of the most preferred tantalum-polymer capacitors available on the market today.

The specific data is subject to PDF, and the above content is for reference