T541X477K010DH8510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum-polymer capacitors are electrical capacitors that use tantalum as the electrolyte component along with a polymer as the charge material. The most common application of tantalum-polymer capacitors is in the power management and regulation of mobile phones and similar consumer electronics. The T541X477K010DH8510 model is one such type of capacitor. It is commonly used in applications such as load regulation, noise filtering, and power transfer.

In their construction, tantalum-polymer capacitors consist of two thin layers of tantalum, three layers of polymer, and a base electrode to connect the capacitor to the circuit board. The tantalum provides the internal electrical connection that enables the capacitor to work and the polymer provides the charge that the capacitor stores. The base electrode connects the capacitor to the circuit board, enabling it to make use of power supplied to the circuit.

The T541X477K010DH8510 is a high capacitance, but low ESR part. It has a capacitance of 47µF and a voltage rating of 16V, both at 25° Celsius (67° F). It has a very low ESR of 12mΩ at 25° Celsius (67° F) and 30mΩ at 85° Celsius (185° F). In addition, it holds a ripple current of 1.2A rms for 1,000 hours. The capacitance and voltage ratings make it suitable for use in power management applications where high accuracy and reliability are required.

Tantalum-polymer capacitors such as the T541X477K010DH8510 are used primarily in applications that require high accuracy and high reliability. This includes power regulation in consumer electronics, noise filtering in audio devices, and power transfer in ruggedized applications.

In power regulation applications, a capacitive load is used to smooth out voltages and regulate power. Tantalum-polymer capacitors are suitable for this application due to their high capacitance and low ESR. They are also sometimes used in energy storage applications due to their high endurance rating.

In noise filtering applications, capacitors are often used to block high frequency noise from passing through the circuit. This can be done by selecting the appropriate dielectric and by adding the capacitor in series with the load. Tantalum-polymer capacitors are a good choice for this application due to their high capacitance and reliability.

Finally, the T541X477K010DH8510 is often used in power transfer applications. These applications require the capacitor to withstand higher voltages and currents than other capacitor types. Tantalum-polymer capacitors are usually a better choice due to their higher volumetric efficiency and higher durability.

In conclusion, the T541X477K010DH8510 is a high accuracy and high reliability capacitor. It is commonly used in applications such as power regulation, noise filtering, and power transfer. It is constructed of two layers of tantalum, three layers of polymer, and a base electrode. It has a capacitance of 47µF and a voltage rating of 16V at 25° Celsius (67° F). It also has a very low ESR of 12mΩ at 25° Celsius (67° F) and 30mΩ at 85° Celsius (185° F). It also holds a ripple current of 1.2A rms for 1,000 hours. These characteristics make it suitable for use in a variety of power management and noise filtering applications.

The specific data is subject to PDF, and the above content is for reference