TA-100.000MBE-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that produce a continuous, oscillating waveform. The wave form produced can be either a sinusoidal, rectangular, or triangular wave. The frequency of the waveform is measured in hertz (cycles per second). Oscillators are used in a variety of applications such as audio systems, radio broadcasting, and even in timing devices such as clocks and watches. The TA-100.000MBE-T is a type of oscillator used in telecommunications systems.

The TA-100.000MBE-T is an oscillator integrated circuit (IC). It is designed for applications in the 4.9 and 6 GHz frequency range. The product is intended for use in radio transmitters, base station, repeaters, and other communication systems. The IC features a low profile package and is constructed using a monolithic dielectric resonator structure which simplifies tuning and high-volume manufacturing. It also offers low-power consumption, long-term stability, and high linearity performance.

The TA-100.000MBE-T offers a broad range of features, including wide tuning range, low noise, a wide dynamic range, and high linearity performance. The IC operates from a single 5V supply and provides a buffered output voltage of 1.1V peak-to-peak. The device can be programmed for frequency tuning via external capacitor programming networks, and operates at a low power consumption of less than 60mW.

The TA-100.000MBE-T has a variety of applications, including radio transmitters, base station repeaters, and other communication systems. It can be used as a local oscillator for up-conversion applications, a pilot tone oscillator for frequency control, a carrier rejection oscillator, and as a sinusoidal time reference signal generator. The device is suitable for applications in the 4.9 and 6 GHz bands in which stability, linearity, and low-power consumption are key design considerations.

The TA-100.000MBE-T oscillator works by producing periodic oscillations of the electrical charge. It is made up of two components: an oscillator circuit and a frequency control circuit. The oscillator circuit is composed of an active device such as a transistor or an operational amplifier, and it is connected to a passive component such as a capacitor or inductor. The frequency control circuit is used to adjust the frequency of the oscillations. It can be done by varying the value of the components in the oscillator circuit or by changing the supply voltage.

In summary, the TA-100.000MBE-T is an oscillator integrated circuit. It is designed for applications in the 4.9 and 6 GHz frequency range. The device provides low-power consumption, long-term stability, and high linearity performance. It can be used as a local oscillator for up-conversion applications, a pilot tone oscillator for frequency control, a carrier rejection oscillator, and as a sinusoidal time reference signal generator. The TA-100.000MBE-T works by producing periodic oscillations of the electrical charge, and its frequency can be adjusted using the frequency control circuit.

The specific data is subject to PDF, and the above content is for reference