TA-32.768MDE-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are integral elements found in all types of electrical systems. TA-32.768MDE-T is one of the digital oscillators used in many different applications, and its working principle is worth exploring.

TA-32.768MDE-T oscillator is a miniature SMD (Surface Mount Device) quartz crystal oscillator with an 8.0x3.2mm footprint. It is designed for many industrial applications, such as mobile phones, cameras, car navigation systems, medical and medical applications, and industrial control systems. Its working principle is based on a divide-by-2048 circuit of low power CMOS/TTL circuitry, a frequency control system, and a crystal chip.

Unlike traditional quartz crystal oscillators, TA-32.768MDE-T does not use a resistor and capacitor (RC) circuit. Rather, it uses a flip flop circuit with a divide-by-2048 frequency divider. This arrangement provides the oscillator with better frequency stability and temperature characteristics because the TA-32.768MDE-T crystal oscillator is more stable and requires less power than RC oscillators.

In order to understand how TA-32.768MDE-T works, it\'s necessary to take a closer look at the flip flop circuit. This circuit consists of two stages: a one-shot and a two-shot. The one-shot is an RS flip flop made up of two NAND gates and a one-shot latch. When the one-shot latch is activated, it sends an input signal to the two-shot latch. This causes the two-shot to change from its current state to the opposite state.

As the two-shot latch changes states, a signal is sent from the one-shot to the frequency divider circuit. This frequency divider contains a set of cascaded flip flops that divide the input frequency by a multiple of two. The output of the frequency divider circuit is then sent back to the one-shot latch. This causes the one-shot to return to its original state, thus completing one cycle of the TA-32.768MDE-T oscillator.

The frequency divider circuit used in TA-32.768MDE-T oscillator consists of three programmable flip flops, as well as two NAND gates and a two-shot latch. The programmable flip flops are used to divide the initial frequency by a factor of by 2, 4 or 8. This allows for the precise selection of frequencies that are within the accuracy range of the oscillator. By changing the settings on the programmable flip flops, it is possible to select an effective frequency divider from 32.768MHz to 32MHz.

Another feature of TA-32.768MDE-T oscillator is its frequency trimming circuit. This allows the oscillator to adjust its frequency in response to various environmental factors. The frequency trimming circuit is equipped with both an analog and digital control. The analog part uses components such as capacitors and resistors to adjust the frequency. The digital portion involves a microcontroller that can be programmed to adjust the frequency. This combined system provides the TA-32.768MDE-T oscillator with a great degree of stability and accuracy.

In conclusion, TA-32.768MDE-T oscillator is a miniature SMD quartz crystal oscillator with a very versatile working principle. It offers impressive frequency stability and temperature characteristics, allowing it to be used in many different applications. The frequency trimming circuit also provides the TA-32.768MDE-T oscillator with exceptional accuracy. Therefore, it is a preferred choice for many modern digital applications.

The specific data is subject to PDF, and the above content is for reference