Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces periodic electrical signals. These electrical signals can be anything from a sinusoidal wave to a square wave. Oscillators are used in a variety of applications, such as radio transmitters, computers, clocks, medical equipment, toys, and many more.

One of the most widely used oscillator types is the TA-33.000MDE-T oscillator. This type of oscillator is a self-contained, low-power, monolithic device that is designed for use in frequency synthesis and PLL applications. Its main feature is its low-power, low-noise performance.

TA-33.000MDE-T application field

The TA-33.000MDE-T oscillator is designed for use in a wide range of applications. It can be used in a variety of frequency synthesis and PLL applications, such as:

• Wireless communication systems
• Digital cellular systems
• Mobile satellite systems
• Avionics and other navigation systems
• Industrial process control systems
• Automobile/motor vehicle control systems
• Digital audio/video systems
• Computer systems

The TA-33.000MDE-T oscillator can also be used in a variety of consumer and industrial applications, such as appliances, consumer electronics, heating, ventilation, and air conditioning systems. It is also suitable for applications requiring low-power, low-noise operation.

TA-33.000MDE-T Working Principle

The TA-33.000MDE-T oscillator is based on an CMOS process and employs a voltage-controlled oscillator (VCO) which is capable of producing a wide range of frequencies. The frequencies are generated by adjusting the voltage on an external control pin of the oscillator. The oscillator also employs a low-noise amplifier (LNA) which is used to increase the signal strength and reduce the unwanted noise.

The output of the VCO is then fed into a quartz crystal oscillator circuit which is used for frequency selection within the oscillator. The quartz crystal provides a very high level of frequency stability and accuracy, and it is also very resistant to temperature and environmental changes. The output of the crystal oscillator is then fed into a voltage-controlled frequency divider (VCFD) which is used to divide the frequency of the output signal. The output from the frequency divider is then sent to the output pin of the oscillator.

The TA-33.000MDE-T oscillator is capable of producing frequencies from 0.1MHz to 150MHz. It has a power consumption of just 7.5 mW and a maximum output of 3mW. Additionally, it has a maximum Symmetry tolerance of 2%, a Temperature Deviation from 0°C to 70°C of 0.25 ppm/°C, and Phase Noise of -104 dBc/Hz at 10MHz.

In conclusion, the TA-33.000MDE-T oscillator is an excellent choice for a variety of frequency synthesis and PLL applications. It is a low-power, low-noise device that is capable of producing a wide range of frequencies. Its frequency stability, accuracy, and resistance to environmental and temperature changes make it an excellent choice for a range of applications.

The specific data is subject to PDF, and the above content is for reference