TA-37.500MCD-T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 85°C
Series:	TA
Voltage - Supply:	2.5V
Output:	CMOS
Function:	Enable/Disable
Frequency:	37.5MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces a periodic, oscillating electronic signal using an active component such as a transistor or vacuum tube. It is used for many purposes, such as producing test signals for use in an electronic circuit, providing a visible signal by means of a lamp, or to generate and route a signal through a loudspeaker.Oscillators are often used in systems that require a signal to be generated at specific intervals, such as radio receivers and transmitters, clock generators, alarms and timers.One common oscillator type is the TA-37.500MCD-T device. This type of oscillator is used in many applications, such as clocks, automotive products, and in medical and industrial equipment.

TA-37.500MCD-T Application Field and Working Principle

The TA-37.500MCD-T oscillator is designed to be used in a wide variety of applications, including automotive, medical, industrial, and consumer electronics. It is a cost-effective alternative to traditional oscillators, and is designed to be used in applications where tight timing is needed.The TA-37.500MCD-T oscillator has a unique design and working principle. It is based on the use of an IC chip and a quartz crystal as its main components. The IC chip provides the oscillator with its signal, while the quartz crystal serves as a frequency reference. When the signal from the IC chip is applied to the quartz crystal, the quartz crystal creates an effect called piezoelectricity, which vibrates at a precise frequency. This vibrating frequency is then used to generate a signal, which is the output of the oscillator. The frequency of the output signal is set by the resonant frequency of the quartz crystal.The TA-37.500MCD-T oscillator has two operating modes: internal and external. In internal mode, the oscillator is operated in-circuit and provides an output signal that can be used in a variety of applications. In external mode, the oscillator is operated directly from the quartz crystal, providing tighter timing accuracy and a higher signal-to-noise ratio.The TA-37.500MCD-T oscillator is designed to be reliable, efficient, and long-lasting. Its components are rated for a temperature range of -20°C to +85°C, and it is designed to be resistant to moisture, humidity, and vibrations.In summary, the TA-37.500MCD-T oscillator is a cost-effective alternative to conventional oscillators, designed to be used in a wide variety of applications. It is based on the use of an IC chip and quartz crystal, which provides the oscillator with its signal. It is designed to be reliable, efficient, and long-lasting, and its components are rated for a temperature range of -20°C to +85°C.

The specific data is subject to PDF, and the above content is for reference