TA-6.000MCD-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits which produce a continuous output signal in the form of electrical oscillations. Regularly producing periodic pulses, they are vital for accurate control in electronic devices. The TA-6.000MCD-T oscillator is one of these, used for frequency control in telecom and network devices. Its design makes it suitable for applications with low supply voltage, minimal current consumption, and low output noise.

Features

The TA-6.000MCD-T oscillator is a 3-pin, surface mounted device. It has a frequency range from 6.000 MHz to 40.000 MHz, a ±100 ppm frequency stability over the full operating temperature range of 0°C to +70°C, and is suitable for both low noise and low drift applications. It also has a power dissipation rating of 5mW, and features a low-profile SMD package, allowing for easy board assembly.

Working Principle

The working principle of the TA-6.000MCD-T oscillator is based on the Colpitts design, a type of LC oscillator. An LC tank circuit, consisting of an inductor and a capacitor, is used to create the oscillations. The oscillator works by resonating input power with a tuned LC tank circuit, producing a sine wave output.

The tank circuit has two series capacitors, C1 and C2, and an inductor, L1. A control voltage, VCC is supplied to the tank circuit while a signal voltage, VSIG is fed back to the input of the op-amp. The feedback voltage,VSIG, passes through the series capacitors, C1 and C2 and in parallel to the inductor, L1. The sum of voltage around the loop is zero, allowing oscillation to occur.

Oscillations generated within the LC tank circuit are a result of the negative feedback provided. The frequency of oscillations is determined by the parameters of the LC tank circuit. As one of the series capacitors, C2, is exposed to the outside, it can be varied to adjust the frequency of oscillations.

Applications

The TA-6.000MCD-T oscillator is primarily used for telecom, network and low-noise, low-drift applications. It is suitable for applications with low current consumption and low noise output, such as communication systems, networking, and radio frequency (RF). Its high frequency stability makes it suitable for use in a variety of environments, including automotive, industrial, and medical applications.

The TA-6.000MCD-T oscillator is also commonly used in satellite communication systems due to its low noise output and small size. It is also suitable for antenna tuning, frequency converters, broadcasting equipment, and radio base station systems.

Conclusion

The TA-6.000MCD-T oscillator is an essential component in a variety of applications which require frequency control. It offers low current consumption and low noise output, along with a high frequency stability across a wide range of temperatures. It is suitable for networks, telecom systems, automotive, industrial, and medical applications, as well as for antenna tuning and radio base station systems.

The specific data is subject to PDF, and the above content is for reference