Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The TA305PA2R00JE is a type of through-hole resistor used for applications such as audio circuits, automotive electronics, and power supply circuits. They provide good electrical insulation for circuit protection, as well as excellent thermal stability against heat/cold and power cycling. The device can also be used in applications where high frequency and low pulse noise can occur.

Application Field

Through-hole resistors are used in a range of applications including audio, automotive electronics, and power supplies. These resistors are resistant to high temperatures, power cycling, and have good electrical insulation against noise and other environmental factors.

In audio circuits, the TA305PA2R00JE is used as a voltage divider in order to adjust the level of an audio signal. This ensures more accurate audio transmission and improved signal-to-noise ratio or other measurements. In automotive electronics, the resistor is used for noise suppression and spark inhibition.

The TA305PA2R00JE is also suitable for power supplies, due to its superior thermal dissipation and mechanical stability. It can deliver a constant, low-noise power supply to microprocessors or other integrated circuits.

Working Principle

The TA305PA2R00JE is a through-hole resistor, made out of a ceramic or carbon film. It has a thin film of metal as the internal resistor material. This metal is deposited on a ceramic or carbon film substrate, in order to increase the resistance of the device. The thin film provides higher temperature stability and a greater power dissipation rate than a traditional wirewound resistor. It also reduces the interference from other components in the circuit.

The metal film is deposited on the substrate using a physical vapor deposition (PVD) or chemical vapor deposition (CVD) process. The PVD process involves plasma sputtering, where a gaseous source is used to deposit the metal onto the substrate. The CVD process involves heating up a gas containing the necessary material, then it is released and the metal is deposited onto the substrate.

The resistor is then fired in order to burn off the excess material on the substrate. The resistor\'s resistance value then becomes fixed and can be used in a circuit. The resistor has excellent characteristics for use in audio, automotive, and power supply circuits.

Conclusion

The TA305PA2R00JE through-hole resistor provides superior performance in applications such as audio circuitry, automotive electronic components, and power supplies. It is made out of a ceramic or carbon film with a thin metal film as the resistor material, which is deposited using either physical or chemical vapor deposition. The device provides excellent temperature stability, power dissipation, and resistance to environmental factors.

The specific data is subject to PDF, and the above content is for reference