TB-18.432MCE-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are an important type of electronic element used in the field of engineering. One particular oscillator that is widely used in this field is the TB-18.432mce-T. This oscillator works by converting an electrical input signal into an electrical output with a very precise frequency and duty cycle.

The TB-18.432mce-T is a high performance, low power, 4-bit CMOS oscillator. It is commonly used in various applications, such as digital communication systems, digital office systems, micro-computer clock systems, frequency synthesizers, and digital audio equipment. Its main advantage is its high frequency accuracy, which is achieved through its use of surface mount technology and its tight crystal oscillator tolerance.

The TB-18.432mce-T has two important parameters: the clock frequency and the duty cycle. The clock frequency is the frequency of the output signal, which is typically measured in MHz (megahertz) or GHz (gigahertz). The duty cycle is the ratio of the high-state to the total state output time of the output signal. This ratio is typically expressed as a percentage.

The most common application for the TB-18.432mce-T is as a clock signal generator. It is used to generate a fixed frequency electrical signal. The frequency of this signal is determined by the crystal oscillator of the oscillator, which is typically set to 18.432 MHz. This oscillator is then used to power the logic circuits of the system, as well as to provide synchronization to other components.

The TB-18.432mce-T also has multiple output terminals, allowing different frequencies and duty cycle to be set. This makes it perfect for use in multi-channel systems, such as those used in radio and cellular communications. With multiple output terminals, the accuracy of each output is greatly increased.

The principle of operation of the TB-18.432mce-T is fairly simple. It consists of a quartz crystal oscillator, which is used to generate a stable electrical signal at the specified frequency. This signal is then fed through the logic circuit, and the output is produced at the output terminals. The resulting signal is very precise and stable, as it has a very low jitter (variation in output frequency).

The TB-18.432mce-T is an ideal choice for engineers in the field of digital communications or embedded systems. Its high frequency accuracy and low power consumption make it perfect for these applications. Its multiple output terminals also make it easy to synchronize multiple components of the system, allowing for greater system performance and reliability.

The specific data is subject to PDF, and the above content is for reference