TC-10.000MCD-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical components which are used to generate an output signal in the form of a periodic oscillation. The TC-10.000MCD-T oscillator is a type of oscillator that is used in a wide range of applications. It is a ceramic resonator with an oscillating frequency of 10.00MHz and is operated with 5 volts of DC power. The device features a low power consumption of just 4-7mA. Additionally, it is also very stable and reliable, with temperature variation being less than +/-1%.

This oscillator is mainly used in communication and computing applications where there is a need for highly precise frequency control. In communication applications, it is used to stabilize the frequency of the signals and to reduce interference from surrounding signals. In computing applications, it is also used to provide a stable clock for digital processors. Other common applications are in timing pulses for motor control systems, and as an accurate reference for frequency synthesis.

The working principle of the TC-10.000MCD-T oscillator is based on the resonance effect of the ceramic material. When the signal circuit is connected with the power, the ceramic material will start to vibrate with a frequency of 10.00 MHz. This frequency depends on the size and shape of the ceramic material, however the frequency is very accurate and stable.

The frequency produced by the oscillator is also very stable in terms of environmental conditions. This is because the ceramic material has a very low coefficient of thermal expansion, meaning that the frequency will not change much with temperature variation. Additionally, the device is also very resistant to vibration and noise from other electric signals.

In order to ensure the highest performance and reliability of the TC-10.000MCD-T oscillator, it is important to pay attention to a few key parameters. Firstly, if the power supply voltage is too high, the frequency will become unstable and the device will be damaged. Secondly, the oscillator should be installed in a closed and vibration free environment. Finally, the ceramic material should be kept away from any strong magnetic fields and radio frequency interference.

In summary, the TC-10.000MCD-T oscillator is a very reliable and accurate device that is widely used in communication and computing applications. It features a highly stable and accurate frequency of 10.00 MHz and is capable of operation with 5 volts of DC power. The device is also very resistant to environmental factors such as vibration, temperature and noise. By following the guidelines outlined above and paying attention to key parameters, users can be sure of the highest performance and reliability from their TC-10.000MCD-T oscillator.

The specific data is subject to PDF, and the above content is for reference